Black Friday see store specials
The Denon AVR-4810CI is a home theater surround sound system that is a state of the art device and priced like one. It hosts a suite of Audyssey sound functions which includes MultEQ XT eight point room acoustic measurement and correction, the latest DSX decoder as well as Dynamic Volume and Dynamic EQ. The Denon AVR-4810CI has a multi-mono block amp construction and a free assign amp configuration that gives the consumer a maximum amount of flexibility for configurations. It has nine on-board amplifier channels that are each rated at 140 watts. Included is a dual AM/FM tuner section, a HD radio, and XM and Sirius satellite radio options. It is built with six HDMi inputs and three component video inputs. The Denon AVR-4810CI is on the expensive end of home theater surround systems.
MSRP $2,999.00
Release date September, 2009
love it
want it
have it
tag it
Pros & Cons15
Reviews2
Details
Buy It6
Competitors2
Related
Gallery3
Pros & Cons
2 positive
0 mixed
0 negative
How is the ProSCORE calculated?
show me!
The ProSCORE is calculated based on the ratio of Pros & Cons about this product as voted by
approved reviewers from the ProductWiki community.
ProSCORE = 100 x (Pro votes) / [(Pro votes) + (Con votes)]
Numbers used for this ProSCORE:
Pro votes = 12
Con votes = 5
Total votes = 17
If you want to help improve the accuracy of the results, register and start voting!
» see the top ranked reviewers
[close]
Details
Features
- Signal conversion to 1080p HDMI
- 9 on-board amplifier channels
- Dolby TrueHD
- DTS HD Master Audio
- Dolby Pro Logic IIz
- MultEQ XT
- Dynamic Volume
- Dynamic EQ
- DSX decoder
- AM/FM tuner section
- HD Radio
- XM and Sirius satellite radio options
Submit a link
This report was started
October 8, 2009 at 4:17 pm by
sionorn
with the last edit occurring
Thursday, 10:38 PM by
warry
This page has been viewed
491 times,
with
31 edits by
3 contributors.
See the
full report history »
Buy It
Denon AVR-4810CI
• Denon AVR-4810CI 9.3 Channel Home Theater Receiver
• AVR-4810CI Receiver
UPC: 883795001151
EAN: 883795001151
MPN: AVR4810CI
Competitors
MSRP $2,499.99
Released September, 2009
Pros
- THX Ultra2 Plus certified
- up to 3 zones - utilize separate sources in all
- 9.2 channel with fully balanced line level outputs
- includes quality backlit remote
- dual HDMI outputs
Cons
- complicated configuration for the non-experienced audiophile / technophile
Denon AVR-4810CI
vs.
Onkyo TX-NR5007
MSRP $1,899.99
Released September, 2009
The Onkyo TX-NR3007 is the second of three network- and internet-radio-ready, 9.2-channel THX Ultra2 Plus certified A/V receivers released in September 2009. It’s stronger than the original TX-NR1007, in that it handles 140W per channel; but it only includes 7 HDMI 1.3a inputs. Like its peer, the Onkyo TX-NR3007 is ready with an advanced...
Denon AVR-4810CI
vs.
Onkyo TX-NR3007
Reviews
October 9, 2009
approved
reviewer
Pros
- 9.3 channels with 140w of amplification each (8 ohms, 20 - 20kHz, <0.05% THD)
- Audyssey DSX capable - 11.1 surround sound
- extremely flexible configuration options
- AM/FM tuner with 56 presets
- quality Anchor Bay processing - upconversion of standard definition content to 1080p via HDMI output
- DLNA compatible
- upgradable firmware via Ethernet port
- 3-zone/source capable (two with video)
- fully assignable channels - including options for biamping, surround, different zones
Cons
- very expensive
- not THX certified
- not HDMI 1.4
- lighter than expected
- 11.1 channel processing only
Did you find this review helpful?
Yes
/
No
Thursday, 10:38 PM
approved
reviewer
Pros
- 9.3 channels with 140w of amplification each (8 ohms, 20 - 20kHz, <0.05% THD)
- Audyssey DSX capable - 11.1 surround sound
- Wifi Network Ready
Cons
Did not agree with any cons
Did you find this review helpful?
Yes
/
No
Price comparison information by:
This product is also known as:
AVR, 4810, CI, AVR4810, 4810CI, AVR4810CI