ProductWiki

Makita BHP454

Tue, 17 Mar 2009 18:38:20 -0400

The Makita BHP454 is an 18v cordless 1/2" hammer drill that is offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and 30 minute optimum charging system which produces 430% total lifetime work with 2.5x more cycles. The Makita built 4-pole maximum torque motor delivers 560 in. lbs. of max torque and 360 in. lbs. of PTI Torque. There is a 2 speed all-metal transmission (0-400/0-1,700 RPM, 0-6,000/0-22,500 BPM) for a wide range of drilling/driving/hammering applications and the Shift-Lock drive system quickly shifts between modes. It is very compact at only 9-9/16" long and weighs only 4.9 lbs for less operator fatigue. The ergonomic shape and comfort grip handle helps for comfort and even work pressure, while two built in L.E.D. light help illuminate the work area. The Makita BHP454 comes with two 18 volt batteries, charger, tool case, tool belt clip, side handle, depth guage, bit holder, screwdriver bits and battery cover, and is also sold as the BHP454Z as the tool only.

Specifications

Steel capacity: 1/2"
Wood capacity: 2-9/16"
Masonry capacity: 5/8"
No Load RPM (Low): 0-400
No Load RPM (High): 0-1,700
Blows/Min.(BPM)(Low): 0-6,000
Blows/Min.(BPM)(High): 0-22,500
Max Torque (in.-lbs.): 560
PTI Torque (in.-lbs.): 360
Watt Hours: 54.0
Battery (Ah): 3.0
Length: 9-9/16"
Net Weight (lbs. w/battery): 4.9

Includes

2 ea. 18V LXT Lithium-Ion 3.0Ah Battery (BL1830)
1 Rapid Optimum Battery Charger (DC18RA)
Tool Case (824753-5)
Tool Belt Clip (324705-1)
Side Handle (450651-3)
Depth Gauge (322223-3)
Bit Holder (419276-2)
Screwdriver Bits (784637-8)
Plastic Battery Cover (450128-8)

DeWalt DCD950KX

Wed, 11 Mar 2009 15:26:50 -0400

The DeWalt DCD950KX is a 18V hammer drill that is considered the best in its class for balance and control. The all-metal transmission has three speeds that are useful for matching the speed of the hammer drill to the task that is at hand. The device uses a heavy-duty 1/2" self-tightening chuck to improve the bit grip and strength of the device, and LED worklight makes tasks in confined spaces much easier. The DeWalt DCD950KX has a high efficiency motor that uses 450 unit watts at max power, making it more powerful than similar devices. It comes with a one hour charger, a 360 degree side handle, 2 x 18V XRP batteries and a heavy-duty kit box.

Features

LED light
2 x 18V XRP batteries
3-speed all metal transmission
1/2" self-tightening chuck
450 unit watts power
Weight: 6.25 pounds
1 hour charger
360 degree side handle
Heavy-duty Kit Box

Makita BHP451

Tue, 17 Mar 2009 18:36:52 -0400

The Makita BHP451 is an 18v cordless 1/2" hammer drill that is offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and optimum charging system which produces 280% total lifetime work with 2x more cycles. The 45 minute charger has built in fan to cool the battery and uses "active 3 control" for current, thermal and voltage control. The Makita built 4-pole maximum torque motor delivers 560 in. lbs. of torque with 0-1,700 RPM and 0-25,500 BPM. It is very compact at only 9-7/8" length and weighs only 4.9 lbs. for less operator fatigue. The ergonomic shape helps for comfort and even work pressure, while two L.E.D. lights help illuminate the work. The Makita BHP451 comes with two 18 volt batteries, 45-minute charger, screwdriver bits and a tool case, and is also sold as the BHP451Z as the tool only.

Specifications

Chuck (metal): 1/2"
Steel capacity: 1/2"
Wood capacity: 2-9/16"
Masonry capacity: 5/8"
No Load RPM (Low): 0-300
No Load RPM (Mid): 0-600
No Load RPM (High): 0-1,700
Blows/Min.(BPM)(Low): 0-4,500
Blows/Min.(BPM)(Mid): 0-9,000
Blows/Min.(BPM)(High): 0-25,500
Torque (in.-lbs.): 560
Watt Hours: 54.0
Battery (Ah): 3.0 (Li Ion)
Length: 9-7/8"
Net Weight (lbs. w/battery): 4.9
Shipping Weight (lbs.): 15.0

Includes

2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute optimum charger (DC18SC)
Screwdriver bits (784637-8)
Tool case (824754-3)

Makita BHP452

Tue, 17 Mar 2009 18:38:16 -0400

The Makita BHP452 is an 18v cordless 1/2" hammer drill that is offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and 30 minute optimum charging system which produces 430% total lifetime work with 2.5x more cycles. The Makita built 4-pole maximum torque motor delivers 450 in. lbs. of torque. There is a 2 speed all-metal transmission (0-400/0-1,500 RPM, 0-6,000/0-22,500 BPM) for a wide range of drilling/driving/hammering applications. It is very compact at only 8-3/4" long and weighs only 4.2 lbs for less operator fatigue. The ergonomic shape helps for comfort and even work pressure, while built in L.E.D. light helps illuminate the work area. The Makita BHP452 comes with two 18 volt batteries, charger, tool case, tool clip belt, battery cover and philips/slotted bit, and is also sold as the BHP452Z as the tool only.

Specifications

Steel capacity: 1/2"
Wood capacity: 1-1/2"
Masonry capacity: 1/2"
No Load RPM (Low): 0-400
No Load RPM (High): 0-1,500
Blows/Min.(BPM)(Low): 0-6,000
Blows/Min.(BPM)(High): 0-22,500
Max Torque (in.-lbs.): 450
Watt Hours: 54.0
Battery (Ah): 3.0
Length: 8-3/4"
Net Weight (lbs. w/battery): 4.2

Includes

2 ea. 18V LXT Lithium-Ion 3.0Ah Battery (BL1830)
1 Rapid Optimum Battery Charger (DC18RA)
Tool Case (824774-7)
Tool Belt Clip (324705-1)
Plastic battery cover (450128-8)
Phillips / Slotted Bit (784637-8)

Makita HP2010N

Mon, 16 Mar 2009 12:56:44 -0400

The Makita HP2010N is a corded hammer drill with a powerful 6-amp motor for drilling up to 3/4" concrete, 1/2" steel, and 1-1/2" wood. The drill is designed with an industrial metal gear housing with all ball and needle bearings to provide years of performance. It features a variable speed switch for smooth startups and offers 2 drilling speeds allowing the user to select the speed and power that is suitable for the task. The HP2010N is double insulated allowing it to withstand high impact and has an adjustable side handle making it easier to control the drill while in use. It also has a depth gauge for drop-in type anchors and comes with a steel case, chuck key and drill chuck. The HP2010N includes a 1 year limited warranty.

Features/Specs

2-speed gear change
Variable speed switch
Industrial metal gear housing
Depth gauge
6-amp motor
All ball and needle bearings
Adjustable side handle
Double insulated
Capacities: Concrete on High: 1/2"; Concrete on Low: 3/4"; Steel on High: 1/4"; Steel on Low: 1/2"; Wood on High: 3/4"; Wood on Low: 1-1/2"
No load speed: High: 0 - 2,300 rpm Low: 0 - 900 rpm
Blows per minute: High: 0 - 46,000 Low: 0 - 18,000
Weight: 6.6 lbs
1 year warranty

DeWalt DC988KA

Wed, 11 Mar 2009 16:46:18 -0400

The DeWalt DC988KA is a heavy-duty 1/2" 18V cordless hammerdrill that comes with a nice 360 degree side handle that is great for long term use of the product. The hammerdrill mode delivers 34,000 bpm. It features a 1/2" metal ratcheting chuck with carbide jaws to prevent slipping and a 3-speed tramsission that has a maximum 3rd speed of 2,000 rpm. The hammerdrill is powered by motor that operates at a maximum power of 420 unit watts, average for a DeWalt product. The DeWalt DC988KA includes a 1 hour charger, 2 x 18V batteries, and a heavy-duty kit box. It is an average size, weighing in at 5.95 pounds.

Features

500 in-lbs of maximum torque
2 x 18V XRP extended run time batteries
Weight: 5.95
1 hour charger
360 degree side handle
Heavy-duty kit box
3-speed transmition
1/2" metal ratcheting chuck
Hammerdrill mode: 34,000 bpm

Makita BTP140

Tue, 17 Mar 2009 21:00:23 -0400

The Makita BTP140 is an 18v lithium-ion cordless hybrid 4-function impact/hammer/driver/drill offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and optimum charging system which produces 280% total lifetime work with 2x more cycles. The 45 minute charger has built in fan to cool the battery and uses "active 3 control" for current, thermal and voltage control. The hybrid 4-function tool drives lag bolts, drills into concrete, drives screws with clutch settings and drills into wood, metal and plastic. The Makita built 4-pole maximum torque motor delivers 1,240 in.lbs. of torque, with a maximum 3,200 RPM and 27,600 BPM. It is extremely compact at only 7-3/8" long and weighs only 3.9 lbs for less operator fatigue. The ergonomic shape helps for comfort and even work pressure, while built in L.E.D. light helps illuminate the work area. The Makita BTP140 comes with two 18 volt batteries, 45-minute charger and tool case, and is also sold as the BTP140Z as the tool only.

Specifications

Capacity (Hex Shank): 1/4"
Impact - No Load RPM: 0-2,300
Impact - Impacts/Min.(IPM): 0-3,200
Impact - Torque (in.-lbs.): 1,280
Hammer Drill - Blows/Min.(BPM)(Low): 0-2,300
Hammer Drill - Blows/Min.(BPM)(High): 0-27,600
Drill - No Load RPM(Low): 0-700
Drill - No Load RPM(High): 0-2,300
Driver Clutch Settings: 16
Watt Hours: 54.0
Battery (Ah): 3.0 (Li-ion)
Length: 7-3/8"
Net Weight (lbs. w/battery): 3.9
Shipping Weight (lbs.): 13.20

Includes

2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute Optimum Charger (DC18SC)
Tool case (8247535)

Makita BHR202

Tue, 17 Mar 2009 18:05:30 -0400

The Makita BHR202 is an 18v cordless 7/8" SDS-Plus rotary hammer drill that is offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and optimum charging system which produces 430% total lifetime work with 2.5x more cycles. The Makita-built motor delivers 0-1,100 RPM and 0-4,000 BPM for faster drilling, and had a built-in torque limiter to disengage bit when hitting rebar. There are 3-modes of operation for rotation only, hammer with rotation and hammer only, with the chisel able to rotate 360° with 40 different positions. For comfortable operation, there is a soft grip handle and ergonomic large 2-finger trigger, and the built in L.E.D. light helps aluminate the work area. It is 14-1/8" long and weighs only 7.0 lbs making this easy to handle and reduces operator fatigue. The Makita BHR202 comes with two 18v batteries, rapid optimum battery charger, contractor bag, side handle and depth guage, and is sold as the BHR202Z which includes no accessories.

Specifications

Concrete capacity: 7/8"
Steel capacity: 1/2"
Wood capacity: 1"
No load speed: 0 - 1,100 RPM
Blows per minute: 0 - 4,000 BPM
Watt hours: 54.0
Battery: 18VDC (3.0Ah)
Impact energy: 1.9 J
Overall length: 14-1/8"
Net weight: 7.0 lbs. (w/battery)

Includes

2 ea. 18V LXT Lithium-Ion 3.0Ah Battery (BL1830)
1 Rapid Optimum Battery Charger (DC18RA)
Contractor Bag (821007-X)
Side Handle (158057-6)
Depth Gauge (324219-0)

DeWalt DCD939KX

Wed, 11 Mar 2009 15:26:46 -0400

The DeWalt DCD939KX is a 14.4V 1/2" hammer drill. It comes equipped with a one hour charger, a 360 degree side handle, and a heavy-duty kit box. The device uses an all-metal transmission that has three speeds, useful for matching the speed of the hammer drill to the task that is at hand. The heavy-duty 1/2" self-tightening chuck improves the bit grip and strength of the device, while its powered by two XRP extended run time 14.4V batteries. The DeWalt DCD939KX has a high efficiency motor that uses 310 unit watts at max power and weighs 5.25 pounds, making it lighter than other devices of its class.

Features

2 x 14.4V XRP batteries
3-speed all metal transmission
1/2" self-tightening chuck
310 unit watts power
Weight: 5.25 pounds
1 hour charger
360 degree side handle
Heavy-duty Kit Box

DeWalt DC725KA

Wed, 11 Mar 2009 16:08:54 -0400

The DeWalt DC725KA is a heavy-duty 1/2" 18V cordless hammerdrill that has the benefit of being compact, allowing it to fit into tight spaces that other drills can't go. Its smaller size also makes it lightweight, weighing a total of only 4.9 pounds. The LED work light that it comes with aids the small size in making the hammerdrill perfect for tight spaces. The DeWalt DC725KA is powered by a frameless motor that operates at a maximum power of 410 unit watts. It features a 1/2" single sleeve ratcheting chuck and includes a 1 hour charger, 2 x 18V batteries, a screwdriver bit and a heavy-duty kit box.

Features

Compact Size
Weighs: 4.9 pounds
1/2" single sleeve ratcheting chuck
Dual speed range 0-5000/1-1,700 rpm and 0-8,500/0-29,000 bpm
Frameless motor
410 unit watts out
LED work light
1 hour charger
2 x 18V batteries
Screwdriver bit
Heavy-duty kit box

DeWalt DCD970KL

Wed, 11 Mar 2009 15:55:42 -0400

The DeWalt DCD970KL is an 18V 1/2" XRP Lilon Hammerdrill. It is considered the best in its class length for balance and control. The hammerdrill uses two XRP nano phosphate Li-Ion batteries that have an extended run-time and battery length. The 1/2" chuck is self-tightening, giving the hammerdrill a better grip on the bit. The DeWalt DCD970KL is powered by a 450 unit watt motor and features an LED worklight that is perfect for work in confined, hard to see spaces. The hammerdrill comes with a 3-speed, all-metal transmission that is perfect for matching the speed of the drill to the task at hand. It includes a 1 hour charger, 2 batteries, a 360 degree side handle and a heavy duty kit box.

Features

2 x 18V nano phosphate Li-Ion batteries
1/2" self-tightening chuck
450 unit watts
LED worklight
3-speed, all-metal transmission
1 hour charger
360 degree side handle
Heavy duty kit box
Weight: 5.25 lbs

Makita BHR240

Tue, 17 Mar 2009 18:08:04 -0400

The Makita BHR240 is an 18v cordless 7/8" SDS-Plus rotary hammer drill that is offered by Makita power tools. This drill is powered by an 18 volt LXT lithium-ion battery and optimum charging system which produces 280% total lifetime work with 2x more cycles. The 45 minute charger has built in fan to cool the battery and uses "active 3 control" for current, thermal and voltage control. The Makita-built motor delivers 0-1,100 RPM and 0-4,000 BPM with synchronized RPM and BPM for faster drilling, and had a built-in torque limiter to disengage bit when hitting rebar. There are 3-modes of operation for rotation only, hammer with rotation and hammer only, with the chisel able to rotate 360° with 40 different positions. It is 14-1/8" long, weighs only 7.0 lbs and is ergonomically designed making it easy to handle and reduces operator fatigue. The Makita BHR240 comes with two 18 volt batteries, 45-minute charger and tool case, and is also sold as the BHR240Z as the tool only.

Specifications

Concrete capacity: 1"
Steel capacity: 1/2"
Wood capacity: 1-1/2"
No Load RPM: 0 - 1,100
Blows/Min.(BPM): 0 - 4,000
Battery (V): 18
Battery (Ah): 3.0
Impact Energy (Joules): 1.9
Length: 16-1/8"
Net Weight (lbs. w/battery): 7.0
Shipping Weight (lbs.): 16.72

Includes

2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
45-minute optimum charger (DC18SC)
Tool case (824771-3)

DeWalt DCD930KX

Wed, 11 Mar 2009 15:08:48 -0400

The DeWalt DCD930KX is a 14.4V 1/2" hammer drill. It comes with XRP extended run time batteries. The all-metal transmission has three speeds that are useful for matching the speed of the hammer drill to the task that is at hand. The heavy-duty 1/2" self-tightening chuck improves the bit grip and strength of the device, while the LED worklight makes tasks in confined spaces much easier. The DeWalt DCD930KX has a high efficiency motor that uses 325 unit watts at max power, making it less powerful than similar devices but not the weakest in its class. It comes with a one hour charger, a 360 degree side handle, 2 XRP batteries and a heavy-duty kit box.

Features

2 x 14.4V XRP batteries
3-speed all metal transmission
1/2" self-tightening chuck
LED worklight
325 unit watts power
Best in class length for balance and control
Weight: 5.75 pounds
1 hour charger
360 degree side handle
Heavy-duty Kit Box

Makita 8390DWPE

Wed, 18 Mar 2009 15:41:57 -0400

The Makita 8390DWPE is an 18v hammer driver-drill offered by Makita power tools. The compact tool body is only 9-3/8" long and weighs 5.1 lbs and the ergonomic rubberized pistol grip makes this drill easy to use with complete comfort and control. There is a two speed gear selection allowing true variable speed from 0-350 RPM or 0-1,200 RPM giving controlled drilling. There are 16 torque settings and drill mode for ultimate torque control, and an electric brake for safety and finer control. Other features include a conveniently located forward/reverse switch and keyless chuck for easy bit changes. The Makita 8390DWPE includes two 18 volt Ni-Cd batteries, charger, phillips/slotted bit, keyless chuck, two battery covers and tool case.

Specifications

Steel capacity: 1/2"
Wood capacity: 1-7/16"
Battery (Ah): 1.3
No Load RPM (Low): 0 - 350
No Load RPM (High): 0 - 1,200
Blowers/Min.(BPM)(Low): 0 - 5,250
Blowers/Min.(BPM)(High): 0 - 18,000
Length: 9-3/8"
Torque (in.-lbs.): 340
Watt Hours: 23.4
Net Weight (lbs. w/battery): 5.1
Shipping Weight (lbs.): 12.76

Includes

2 ea. Ni-Cd Battery PA18 (194107-3)
Universal Charger
Phillips/Slotted Bit (784636-0)
Keyless Chuck (763178-7)
2. ea. Battery Cover (414938-7)
Tool Case (824744-6)

Hitachi FDV16VB2

Fri, 20 May 2011 15:09:20 -0400

DeWalt DC925KA

Wed, 11 Mar 2009 16:46:04 -0400

The DeWalt DC925KA is a heavy-duty 1/2" 18V cordless hammerdrill that doesn't have any specific feature that makes it any better than any other DeWalt cordless hammerdrill. It is an average size, weighing in at 6.1 pounds. It is described as having superior ergonomics, and the highly positive user reviews seem to support that statement. The DeWalt DC925KA is powered by a frameless motor that operates at a maximum power of 480 unit watts, an average power rating. It features a 1/2" self-tightening chuck which is great for providing a better bit grip and torque. The DeWalt DC925KA includes a 1 hour charger, 2 x 18V batteries, a 360 degree side handle and a heavy-duty kit box.

Features

480 unit watts max power
3-speed all-metal transmission
1/2" self-tightening chuck
2 x XRP extended run time batteries
Weight: 6.1 lbs
1 hour charger
360 degree side handle
Heavy Duty Kit box

DeWalt DC901KL

Tue, 10 Mar 2009 14:35:40 -0400

The DeWalt DC901KL is a heavy duty cordless hammerdrill that is powered by a 750 watt motor. It uses a NANO phosphate lithium ion cell for a battery that can be recharged up to 2,000 times and is an ENERGY STAR rated device, making it great for those who care about energy efficiency and the environment. The transmision is completely made out of metal and comes with three speeds so the consumer can match the speed of the device to the work that is at hand. The chuck is 1/2", heavy duty, and self-tightening. The DeWalt DC901KL comes with an anti-slip comfort grip to improve the consumer's control over the device and decrease strain when using it for long periods of time.

Features

750 watts
ENERGY STAR device
NANO-phosphate lithium ion cells
2,000 recharges
3-speed, all-metal transmission
1/2" self-tightening chuck
Anti-slip comfort grip
1 hour charger
Heavy-duty kit box

Makita BHR200SAE

Tue, 17 Mar 2009 21:29:43 -0400

The Makita BHR200SAE is a powerful 24v Makstar 13/16" corldess rotary hammer offered by Makita power tools with variable speed, reverse and SDS. This drill is uses a powerfull 24 volt Ni-MH Makstar battery for longer runtime. There are 3-mode settings for hammering, drilling and rotation with hammering, and there is an electric brake for safety and more control. The balanced design and ergonomic rubberized D-handle grip make it comfortable and easy to handle. The high performance Makita motor gives longer tool life, and one touch sliding chuck gives easy bit installation. The Makita BHR200SAE comes with two 24 volt batteries, charger, side handle, depth guage, bit grease and tool case.

Specifications

Concrete capacity: 13/16"
Steel capacity: 1/2"
Wood capacity: 1-1/16"
No Load RPM: 0 - 1,100
Blows/Min.(BPM): 0 - 4,700
Watt Hours: 48
Battery (Ah): 2.0
Impact Energy (Joules): 1.75
Length: 12-7/16"
Net Weight (lbs. w/battery): 8.4
Shipping Weight (lbs.): 20.50

Includes

2 ea. Ni-MH Battery BH2420 (193737-7)
Charger DC24SA
Side handle (152521-9)
Depth gauge (321144-6)
Bit Grease (181573-3)
Plastic tool case (152790-2)

Makita HP2070F

Mon, 16 Mar 2009 13:25:21 -0400

The Makita HP2070F is a 3/4" corded hammer drill with a powerful 8.2-amp motor making it a step up from Makita's 6.6-amp HP2050F. The drill features hammering with rotation and rotation only modes with a positive stop mode selector to prevent it from slipping out of gear. It has a shock-proof LED light which illuminates the area while drilling and includes a built-in torque limiter which stops operation when the drill hits a reinforcement. The HP2070F is lightweight at only 5.3 lbs and is ergonomically designed with a rubberized grip for comfort and a 360° swivelling side handle to make it easy to control. It has a ball bearing construction for longer motor life and includes ventilation holes to cool the motor while protecting it from dust and dirt. The HP2070F comes with a steel case, chuck key, and a 1 year limited warranty.

Features/Specs

Built-in shock-proof, high output, white L.E.D. light
Dual mode: hammering with rotation and rotation only
Positive Stop Mode Selector
Built-in Torque Limiter
Large trigger switch
360° swivel side handle and rubberized grip
Air vent holes
Ball bearing construction
Recessed lock-on button
8.2-amp motor
Capacities: Concrete: 3/4"; Steel on High: 5/16"; Steel on Low: 5/8"; Wood on High: 1-9/16"; Wood on Low: 1"
No load speed: High: 0 - 2,900 rpm Low: 0 - 1200 rpm
Blows per minute: High: 0 - 58,000 Low: 0 - 24,000
Weight: 5.3 lbs
1 year warranty

Milwaukee 0824-24

Wed, 11 Mar 2009 19:55:54 -0400

The Milwaukee 0824-24 is a high powered cordless hammer-drill/driver described as being ideal for drilling larger holes and driving larger screws even faster. Weighing only 6.2 lbs, the compact & extra lightweight Milwaukee 0824-24 features a high-output motor that generates an enormous 550 in-lbs of torque to meet the various application rigors of a jobsite. In addition, the 0824-24 hammer drill utilizes an 18V Lithium-ion battery pack that cuts up to 25 2-9/16” selfeed bit holes per charge. Plus, the Milwaukee 0824-24 drill includes a ½” metal ratcheting chuck with carbide jaws that provides superior bit grip, a universal charger, an on-board bit holder, and a carrying case. The Milwaukee 0824-24 retails for $269.99 and comes with a 5 year limited warranty.

Features

High-Output Motor
18V Lithium-ion Battery
½” Single-Sleeve Ratcheting Chuck
On-Board Bit Holder
Universal Charger
Carrying Case
5 Year Limited Warranty

Specifications

Voltage: 18 DC
Torque: 550 in-lbs
RPM Low: 0-450
RPM High: 0-1,700
BPM: 0-27,200
Size: 10-5/8”
Weight: 6.2 lbs

Makita HP2050F

Mon, 16 Mar 2009 13:18:33 -0400

The Makita HP2050F is a 3/4" corded hammer drill with a powerful 6.6-amp motor making it a step down from Makita's 8.2-amp HP2070F. The drill features hammering with rotation and rotation only modes with a positive stop mode selector to prevent it from slipping out of gear. It has a shock-proof LED light which illuminates the area while drilling and includes a built-in torque limiter which stops operation when the drill hits a reinforcement. The HP2050F is very lightweight at only 5.1 lbs, making it the lightest tool on the market according to Makita. It has a ball bearing construction for longer motor life and includes ventilation holes to cool the motor while protecting it from dust and dirt. The drill is also ergonomically designed with a rubberized grip for comfort and a 360° swivelling side handle to make it easier to control. The HP2050F comes with a steel case, chuck key, and a 1 year limited warranty.

Features/Specs

Built-in shock-proof, high output, white L.E.D. light
Dual mode: hammering with rotation and rotation only
Positive Stop Mode Selector
Built-in Torque Limiter
Large trigger switch
360° swivel side handle and rubberized grip
Air vent holes
Ball bearing construction
Recessed lock-on button
6.6-amp motor
Capacities: Concrete: 3/4"; Steel on High: 5/16"; Steel on Low: 1/2"; Wood: 1-9/16"
No load speed: High: 0 - 2,900 rpm Low: 0 - 1200 rpm
Blows per minute: High: 0 - 58,000 Low: 0 - 24,000
Weight: 5.1 lbs
1 year warranty

DeWalt DC935KA

Wed, 11 Mar 2009 16:46:09 -0400

The DeWalt DC935KA is a heavy-duty 1/2" 14.4V cordless hammerdrill that doesn't come with the handy 360 degree handle that other DeWalt cordless hammerdrills come with. It is a smaller than average size, weighing in at 5.4 pounds. The manufacturer describes it as having superior ergonomics, but the product doesn't have the user reviews on the manufacturer's own site to support that statement. The DeWalt DC935KA is powered by motor that operates at a maximum power of 335 unit watts, very low for a DeWalt product. It features a 1/2" self-tightening chuck which is great for providing a better bit grip and torque. The DeWalt DC935KA includes a 1 hour charger, 2 x 14.4V batteries, and a heavy-duty kit box.

Features

Weight: 5.4 lbs
335 unit watts maximum power
1/2" self-tightening chuck
3-speed, all-metal transmission
2 x 14.4V XRP batteries
Heavy-duty kit box
22 clutch settings
1 hour charger

DeWalt DC927KL

Wed, 11 Mar 2009 14:55:54 -0400

The DeWalt DC927KL is the least powerful member of its line, running at 426 unit watts. It is a 1/2" 18V cordless hammerdrill that comes with an anti-slip comfort grip to improve the consumer's control over the device and decrease strain when using it for long periods of time. It uses a NANO phosphate lithium ion cell for a battery that can be recharged up to 2,000 times and comes with a 1/2", heavy duty, self-tightening chuck. The DeWalt DC927KL has a transmision that is completely made out of metal and comes with three speeds so the consumer can match the speed of the device to the work at hand.

Features

425 watts
NANO-phosphate lithium ion cells
2,000 recharges
3-speed, all-metal transmission
1/2" self-tightening chuck
Anti-slip comfort grip
1 hour charger
Heavy-duty kit box

DeWalt DC910KL

Wed, 11 Mar 2009 14:55:49 -0400

The DeWalt DC910KL is a 650 unit watt heavy duty cordless hammerdrill. It uses less electricity than similiar products and is an ENERGY STAR rated device, making it great for those who care about energy efficiency and the environment. The drill comes with an anti-slip comfort grip to improve the consumer's control over the device and decrease strain when using it for long periods of time. It uses a NANO phosphate lithium ion cell for a battery that can be recharged up to 2,000 times and the chuck is 1/2", heavy duty, and self-tightening. The DeWalt DC910KL has a transmision that is completely made out of metal and comes with three speeds so the consumer can match the speed of the device to the work that is at hand.

Features

650 watts
ENERGY STAR device
NANO-phosphate lithium ion cells
2,000 recharges
3-speed, all-metal transmission
1/2" self-tightening chuck
Anti-slip comfort grip
1 hour charger
Heavy-duty kit box

Milwaukee 2611-24

Tue, 10 Mar 2009 23:22:52 -0400

The Milwaukee 2611-24 is a high performance cordless hammer-drill/driver that delivers revolutionary power, run-time, and ergonomics. Weighing only 5.3 lbs, the compact & lightweight Milwaukee 2611-24 hammer drill features a 4-pole frameless motor that generates 650 in-lbs of torque to meet the various application rigors of a jobsite. In addition, the 2611-24 hammer drill utilizes an 18V XC high capacity Lithium-ion battery that delivers a whopping 65% more holes per charge. Plus, the Milwaukee 2611-24 drill boasts incorporates an easy-to-use ½” single-sleeve ratcheting metal chuck with carbide jaws for maximum grip. The Milwaukee 2611-24 driver drill also boasts a variable speed trigger, an on-board battery fuel gauge that displays remaining run-time, a built-in LED light that illuminates the work surface, and a carrying case. The Milwaukee 2611-24 retails for $349.99 and comes with a 5 year limited warranty.

Features

4-Pole Frameless Motor
18V Lithium-Ion Battery
½” Ratcheting Metal Chuck
Variable Speed Trigger
Battery Fuel Gauge
LED Light
LED Light
Carrying Case
5 Year Limited Warranty

Specifications

Voltage: 18V
Torque: 650 lbs
RPM Low: 0-450
RPM High: 0-1,800
BPM: 0-28,000
Size: 9-1/4”
Weight: 5.3 lbs

Hitachi DV24DV

Fri, 20 May 2011 15:09:50 -0400

Makita HP1621FK

Mon, 16 Mar 2009 14:00:38 -0400

The Makita HP1621FK is a 5/8" corded hammer drill with a 5.7-amp motor making it a less powerful version of Makita's 6.6-amp HP2050F. The drill features hammering with rotation and rotation only modes with an innovative forward/reverse switch for better performance. It has a variable speed switch for easy startup, a large trigger switch, and a shock-proof LED light which illuminates the area while drilling. The HP1621FK is very lightweight at only 3.7 lbs and is ergonomically designed with a rubberized grip for comfort and a 360° swivelling side handle to make it easier to control. It has a ball bearing construction for longer motor life and includes a lock-on button for continuous operation. The drill is identical to Makita's HP1620F but while the HP1620F includes only the drill, side handle, and depth gauge, the HP1621FK comes with an additional tool case and 9-piece bit set.

Features/Specs

Built-in shock-proof, high output, white L.E.D. light
Dual mode: hammering with rotation and rotation only
Large trigger switch
360° swivel side handle
Rubberized grip
Ball bearing construction
Forward/reverse change system
Recessed lock-on button
5.7-amp motor
Includes tool case and 9-piece bit set
Capacities: Concrete: 5/8", Steel: 1/2", Wood: 1-3/16"
No load speed: High: 0 - 2,800 rpm
Blows per minute: High: 0 - 44,800
Weight: 3.7 lbs
1 year warranty

DeWalt DCD959KX

Wed, 11 Mar 2009 15:26:56 -0400

The DeWalt DCD959KX is a 18V hammer drill that unlike similiar products, is not the best in its class for balance and control and also does not come with a helpful LED worklight. The device uses a heavy-duty 1/2" self-tightening chuck to improve the bit grip and strength of the device, a common feature on DeWalt devices. The DeWalt DCD959KX has a high efficiency motor that uses 420 unit watts at max power, making it more powerful than similar devices but not the most powerful in its line. The all-metal transmission has three speeds that are useful for matching the speed of the hammer drill to the task that is at hand. The DeWalt DCD959KX comes with a one hour charger, a 360 degree side handle, 2 x 18V XRP batteries and a heavy-duty kit box.

Features

2 x 18V XRP batteries
3-speed all metal transmission
1/2" self-tightening chuck
420 unit watts power
Weight: 6 pounds
1 hour charger
360 degree side handle
Heavy-duty Kit Box

Hitachi DV16V

Fri, 20 May 2011 15:09:26 -0400

Bosch HD21-2

Fri, 20 May 2011 15:08:39 -0400

Makita 8444DWDE

Wed, 18 Mar 2009 15:43:35 -0400

The Makita 8444DWDE is an 18v 1/2" MXT hammer driver-drill offered by Makita power tools. This drill features a two-piece ND-31 motor with dual ball bearings for longer motor life, and can deliver up to 560 in.lbs. of maximum torque. It is powered by a powerful 18V Ni-MH battery and comes with a universal charger. The Shift-Lock drive system allows quick shifting from "hammer drill" to "driver" mode with one touch. There are 3 speed settings, each with variable control, and 16 torque settings allowing the drill to be set for any required job. For more control and comfort, there is an ergonomic rubberized grip and a side handle for extra leverage. The Makita 8444DWDE comes with two 18 volt Ni-MH batteries, phillips/slotted bit, charger, side handle, depth guage, keyless chuck, battery cover and plastic tool case.

Specifications

Steel capacity: 1/2"
Masonry capacity: 5/8"
No Load RPM (Low): 0 - 300
No Load RPM (Mid): 0 - 600
No Load RPM (High): 0 - 1,700
Blows/Min.(BPM)(Low): 0 - 4,500
Blows/Min.(BPM)(Mid): 0 - 9,000
Blows/Min.(BPM)(High): 0 - 25,500
Torque (in.-lbs.): 560
Watt Hours: 46.8
Battery (Ah): 2.6
Length: 10-3/8"
Net Weight (lbs. w/battery): 6.0
Longer run time carbon brushes
3" Self-feed bit: 19 hole per charge
7/8" Spade bit: 68 holes per charge
3/8" Lag bolt: 96 lags driven per charge
Shipping Weight (lbs.): 15.02

Includes

2 ea. Battery 1834 (193159-1)
Universal charger
Phillips/slotted bit (784637-8)
Side handle (152624-9)
Depth gauge (122576-8)
Keyless chuck (763191-5)
Battery cover (414938-7)
Plastic tool case (824534-7)

Makita 8443DWDE

Wed, 18 Mar 2009 15:43:30 -0400

The Makita 8443DWDE is an 18v 1/2" hammer driver-drill offered by Makita power tools. This drill is powered by a powerful 18V Ni-MH battery which drives a high performance Makita motor. There are 16 torque settings, and can deliver up to 400 in.lbs. of torque. There are 3 mode settings for hammer drilling, driving and drilling with a 2-speed gear selection, both with variable speed. For more control and comfort, there is an ergonomic rubberized grip and a side handle for extra leverage, which can be rotated 360° around the tool. There is a conveniently located forward/reverse switch and keyless chuck for easy bit changes. The Makita 8443DWDE comes with two 18 volt Ni-MH batteries, phillips/slotted bit, charger, side handle, depth guage and plastic tool case.

Specifications

Steel capacity: 1/2"
Masonry capacity: 5/8"
No Load RPM (Low): 0 - 450
No Load RPM (High): 0 - 1,400
Blows/Min.(BPM)(Low): 0 - 6,750
Blows/Min.(BPM)(High): 0 - 21,000
Torque (in.-lbs.): 400
Watt Hours: 46.8
Battery (Ah): 2.6
Length: 10-1/2"
Net Weight (lbs. w/battery): 5.7
Shipping Weight (lbs.): 14.0

Includes

2 Ea. Ni-MH Battery 1834 (193159-1)
Phillips/slotted bit (784614-0)
Charger DC1801
Side handle (122575-0)
Depth gauge (122576-8)
Plastic tool case (824546-0)

Makita HP1620F

Mon, 16 Mar 2009 13:51:57 -0400

The Makita HP1620F is a 5/8" corded hammer drill with a 5.7-amp motor making it a less powerful version of Makita's 6.6-amp HP2050F. The drill features hammering with rotation and rotation only modes with an innovative forward/reverse switch for better performance but lacks the positive stop mode selector of the HP2050F. It has a variable speed switch for easy startup, a large trigger switch, and a shock-proof LED light which illuminates the area while drilling. The HP1620F is very lightweight at only 3.7 lbs and is ergonomically designed with a rubberized grip for comfort and a 360° swivelling side handle to make it easier to control. It has a ball bearing construction for longer motor life and includes a lock-on button for continuous operation. The HP1620F comes with a depth gauge, chuck key, and a 1 year limited warranty.

Features/Specs

Built-in shock-proof, high output, white L.E.D. light
Dual mode: hammering with rotation and rotation only
Large trigger switch
360° swivel side handle
Rubberized grip
Ball bearing construction
Forward/reverse change system
Recessed lock-on button
5.7-amp motor
Capacities: Concrete: 5/8", Steel: 1/2", Wood: 1-3/16"
No load speed: High: 0 - 2,800 rpm
Blows per minute: High: 0 - 44,800
Weight: 3.7 lbs
1 year warranty

Milwaukee 0724-24

Wed, 11 Mar 2009 19:46:24 -0400

The Milwaukee 0724-24 is a high powered cordless hammer-drill/driver described as being ideal for drilling larger holes and driving larger screws even faster. Weighing only 6.7 lbs, the compact & lightweight Milwaukee 0724-24 features a high-output motor that generates an enormous 600 in-lbs of torque to meet the various application rigors of a jobsite. In addition, the 0724-24 hammer drill utilizes a revolutionary 28V Lithium-ion battery pack that weighs less than an 18V pack, yet delivers twice the run-time. Plus, the Milwaukee 0724-24 drill includes a ½” all-metal single-sleeve ratcheting chuck with all carbide jaws that keeps bits from falling out. The Milwaukee 0724-24 hammer drill also boasts a comfortable non-slip/soft-grip handle for reduced vibration & fatigue, a Clip-Lok system that attaches securely to the operator’s belt or tool bags, an on-board bit holder, a universal charger, and a carrying case. The Milwaukee 0724-24 retails for $399.99 and comes with a 5 year limited warranty.

Features

High-Output Motor
28V Lithium-ion Battery
½” Single-Sleeve Ratcheting Chuck
Non-Slip Grip
Clip-Lok System
On-Board Bit Holder
Universal Charger
Carrying Case
5 Year Limited Warranty

Specifications

Voltage: 28 DC
Torque: 600 in-lbs
RPM Low: 0-600
RPM High: 0-1,800
BPM: 0-27,000
Size: 10-1/2”
Weight: 6.7 lbs

DeWalt DC984KA

Wed, 11 Mar 2009 16:46:13 -0400

The DeWalt DC984KA is a heavy-duty 1/2" 14.4V cordless hammerdrill. It features the 3-speed tramsission that has a maximum 3rd speed of 1,800 rpm, great for matching the speed to the task at hand. The hammerdrill is powered by motor that operates at a maximum power of 310 unit watts, very low for a DeWalt product. It features a 1/2" metal ratcheting chuck with carbide jaws to prevent slipping. The DeWalt DC984KA includes a 1 hour charger, 2 x 14.4V batteries, and a heavy-duty kit box. It is a smaller than average size, weighing in at 5.25 pounds.

Features

2 x 14.4V XRP batteries
1 hour charger
Heavy Duty kit box
3-speed transmission
3rd speed: 1,800 RPM
Weight: 5.25 lbs
1/2" metal single-sleeve ratcheting chuck
310 unit watts

Milwaukee 0629-24

Tue, 10 Mar 2009 23:42:16 -0400

The Milwaukee 0629-24 is a high performance cordless hammer-drill/driver that delivers 10% more power than previous models. Weighing only 6.7 lbs, the compact & lightweight Milwaukee 0697-24 features a high-output motor that generates 550 in-lbs of torque to meet the various application rigors of a jobsite. In addition, the 0629-24 hammer drill utilizes two 2.4 Ah NiCd batteries for a long run-time between charges. Plus, the Milwaukee 0629-24 drill includes a ½” metal single-sleeve ratcheting chuck with carbide jaws for a superior grip torque on bits, a clutch by-pass that provides quick shifts between drill/drive/hammer modes while still maintaining clutch position, a 1-hour charger, and a carrying case. The Milwaukee 0629-24 retails for $259.99 and comes with a 5 year limited warranty.

Features

High-Output Motor
Two 2.4 Ah NiCd Batteries
½” Single-Sleeve Ratcheting Chuck
Clutch By-Pass
1-Hour NiCd AC Charger
Carrying Case
Insert Bit No. 2 Philips ¼”
5 Year Limited Warranty

Specifications

Voltage: 18 DC
Torque: 550 in-lbs
RPM Low: 0-450
RPM High: 0-1,700
BPM: 0-27,200
Size: 10-5/8”
Weight: 6.7 lbs

Milwaukee 0627-24

Tue, 10 Mar 2009 23:42:12 -0400

The Milwaukee 0627-24 is a high performance cordless hammer-drill/driver that delivers high torque, a long run-time, and increased quality & durability. Weighing only 6.7 lbs, the compact & lightweight Milwaukee 0627-24 is an upgrade from the Milwaukee 0617-24 hammer drill. The Milwaukee 0627-24 hammer drill features a high-efficiency motor that generates 495 (versus 460) in-lbs of torque to meet the various application rigors or a jobsite. In addition, the 0627-24 hammer drill utilizes an 18V(versus 14.4V) battery that delivers more holes per charge. Plus, the Milwaukee 0627-24 drill incorporates an all-metal & single-steel ratcheting chuck with carbide jaws to provide a high grip torque on bits. The Milwaukee 0627-24 hammer drill also boasts a Clip-Lok belt clip, a carrying case, a 1-hour charger, and a soft-grip ergonomic handle that provides improved comfort and control. The Milwaukee 0627-24 retails for $299.99 and comes with a 5 year limited warranty.

Features

High-Efficiency Motor
18V Lithium-Ion Battery
Single-Steel Ratcheting Chuck
Clip-Lok Belt Clip
Carrying Case
1-Hour NiCd AC Charger
Soft-Grip Handle
Insert Bit No. 2 Philips ¼”
5 Year Limited Warranty

Specifications

Voltage: 18 DC
Torque: 495 in-lbs
RPM Low: 0-500
RPM High: 0-1,700
BPM: 0-25,500
Size: 10-5/8”
Weight: 6.7 lbs

Milwaukee 0617-24

Tue, 10 Mar 2009 23:41:15 -0400

The Milwaukee 0617-24 is a high performance cordless hammer-drill/driver that delivers high torque, a long run-time, and increased quality & durability. Weighing only 6.1 lbs, the compact & lightweight Milwaukee 0617-24 hammer drill features a high-efficiency motor that generates 460 in-lbs of torque to meet the various application rigors or a jobsite. In addition, the 0617-24 hammer drill utilizes a 14.4V, 2.4 amp-hr battery that delivers more holes per charge. Plus, the Milwaukee 0617-24 drill incorporates an all-metal & single-steel ratcheting chuck with carbide jaws to provide a high grip torque on bits. The Milwaukee 0617-24 hammer drill also boasts a Clip-Lok belt clip, a carrying case, a 1-hour charger, and a soft-grip ergonomic handle that provides improved comfort and control. The Milwaukee 0617-24 retails for $199.99 and comes with a 5 year limited warranty.

Features

High-Efficiency Motor
14.4V Lithium-Ion Battery
Single-Steel Ratcheting Chuck
Clip-Lok Belt Clip
Carrying Case
1-Hour NiCd AC Charger
Soft-Grip Handle
Insert Bit No. 2 Philips ¼”
5 Year Limited Warranty

Specifications

Voltage: 14.4 DC
Torque: 460 in-lbs
RPM Low: 0-500
RPM High: 0-1,700
BPM: 0-25,500
Size: 10-5/8”
Weight: 6.1 lbs

Hitachi DS18DL

Fri, 20 May 2011 15:09:56 -0400

Hitachi DV14DL/JL

Fri, 20 May 2011 15:09:53 -0400

Hitachi DV14V

Fri, 20 May 2011 15:09:47 -0400

Hitachi DH24PB3

Fri, 20 May 2011 15:09:44 -0400

Hitachi DV10DVK

Fri, 20 May 2011 15:09:41 -0400

Hitachi DV18DMR

Fri, 20 May 2011 15:09:39 -0400

Hitachi DV18DCL

Fri, 20 May 2011 15:09:36 -0400

Hitachi DS18DLP4

Fri, 20 May 2011 15:09:34 -0400

Hitachi DV18DVC

Fri, 20 May 2011 15:09:31 -0400

Hitachi DV14DL

Fri, 20 May 2011 15:09:28 -0400

Hitachi DV18DLP4

Fri, 20 May 2011 15:09:23 -0400

Hitachi DV18DL

Fri, 20 May 2011 15:09:18 -0400

Bosch 33614-2G

Fri, 20 May 2011 15:09:15 -0400

Bosch 13614

Fri, 20 May 2011 15:09:13 -0400

Bosch 13618

Fri, 20 May 2011 15:09:10 -0400

Bosch 13614-2G

Fri, 20 May 2011 15:09:01 -0400

Bosch 17614-01

Fri, 20 May 2011 15:08:58 -0400

Bosch 1194AVSR

Fri, 20 May 2011 15:08:56 -0400

Bosch 1199VSR

Fri, 20 May 2011 15:08:53 -0400

Bosch 18636-01

Fri, 20 May 2011 15:08:47 -0400

Bosch HDB180-02

Fri, 20 May 2011 15:08:44 -0400

Bosch HDB180B

Fri, 20 May 2011 15:08:41 -0400

Bosch 13624-2G

Fri, 20 May 2011 15:08:35 -0400

Bosch 17618B

Fri, 20 May 2011 15:08:32 -0400

Bosch 15614

Fri, 20 May 2011 15:08:29 -0400

Bosch 18636-03

Fri, 20 May 2011 15:08:26 -0400

Bosch 1199VSRK

Fri, 20 May 2011 15:08:23 -0400

Bosch 18636-02

Fri, 20 May 2011 15:08:20 -0400

Bosch 11247

Fri, 20 May 2011 15:08:16 -0400

Bosch 17618-01

Fri, 20 May 2011 15:08:14 -0400

Bosch 1191VSRK

Fri, 20 May 2011 15:08:12 -0400

Bosch 15618

Fri, 20 May 2011 15:08:04 -0400