ProductWiki

Odyssey Marxman X-Act Putting Wedge

Fri, 04 Jun 2010 14:40:31 -0400

The Odyssey Marxman X-Act Putting Wedge is built to play between a putter and a wedge for shots around the green. A number of shots are accommodated, including a pitch shot 15 yards off the green, a chip shot 3 to 5 yards off the green, and a bump n run for shots from just off the green. It uses a Hi-Def Alignment System to produce more accurate shots, and has a a Grove-less Polymer Insert to create forward spin and reduce bouncing. The sole design allows for a reduction in contact with the ground.

Features

Hi-Def Alignment System – Produces more accurate shots
37° of Loft
Grove-less Polymer Insert
Unique Sole Design
Longer Grip
Bulls-eye dot

TaylorMade Rossa Core Classics Putters

Wed, 15 Jul 2009 16:59:41 -0400

The TaylorMade Rossa Core Classics Putters is a line of putter that feature classic, tour proven head-shapes with AGSI+ technology. AGSI+ stands for "Anti-skid Grove System Insert", which is a putter face insert that incorporates 12 uniquely shaped CNC-milled grooves to promote forward spin and reduce skid and bounce for superior distance-control and accuracy. These grooves are filled with a soft polymer to absorb unwanted impact vibration to give a satisfying feel at impact. Weight saved from the TitalliumTM insert is redistributed to the perimeter of the putterhead increasing the moment of intertia (MOI) for exceptional forgiveness on mis-hits. The head is made from 304 stainless steel and has a Tuscan nickel finish for a sleek, beautiful look. There are four time-honored shapes available, all of which incorporate traditional lines and sole widths. Those models are the Daytona, Suzuka, Lambeau and Fontana.

Features

AGSI - Anti-skid Grove System Insert
Polymer filled grooves
304 stainless steel head w/ Tuscan nickel finish
TitalliumTM insert
Loft: 3.5 degrees
Lie angle: 70 degrees
Club lengths: 33", 34", 35"
Club swing weight: D6-8

Putter Models

Daytona
- Right and Left handed options
- Full offset
- Blade design
Lambeau
- Right handed option only
- 1/2 offset
- Blade design
Fontana
- Right handed option only
- 1/2 offset
- Mallet design
Suzuka
- Right handed option only
- Full offset
- Mallet design

Titleist Scotty Cameron Studio Select

Tue, 17 Feb 2009 18:40:05 -0500

The Titleist Scotty Cameron Studio Select is a top of the line putter set in Titleist's Scotty Cameron line of putters. The Select family of putters use precision milled 303 stainless steel with removable heel and toe weights for multiple length options. These dual weights give increased stabililty with less head rotation and a larger sweet spot. The improved high toe profile eliminates the tendency of players to raise the toe causing them to aim consistently to the left. The Studio Select H (heavy) putters feature a 10g heavier head to give a heavier feel that is prefered by some players. There is a silver/red theme throughout the putter, including red tour graphics on the head, stylish head cover and a red Cameron cord grip. Models available are the Newport, Newport 1.5, Newport 2 (RH & LH), Newport 2 Mid Slant, Newport 2.6, Newport 2.7, Squareback 1 (RH & LH) and Fastback 1, each of which are available in standard and heavy heads.

Standard head putters are available in 33"(360g), 34"(350g) and 35"(340g) while heavy head clubs are only available in 34"(360g) and 35"(350g). LH models are available in Newport 2 and Squareback 1 models only. All models have 4° loft, 71° lie but have varying offset and neck styles.

Features / Specifications

Precision milled 303 Stainless Steel body
Factory adjustable Stainless Steel heel & toe circular weights
Standard and heavy head models available
Models: Newport, Newport 1.5, Newport 2 (RH & LH), Newport 2 Mid Slant, Newport 2.6, Newport 2.7, Squareback 1 (RH & LH) and Fastback 1
Loft: 4°
Lie: 71°
Lengths (std): 33", 34", 35"
Weights (std): 360g, 350g, 340g
Lenghts (heavy): 34", 35"
Weights (heavy): 360g, 350g
Offset styles: Full shaft, 1/2 shaft, none
Neck styles: Plumbing, flare, mid slant, straight in, double bend

Odyssey White Ice Series

Fri, 04 Jun 2010 15:09:06 -0400

The White Ice Series is a line of inexpensive putters from Odyssey. Like many of Odyssey's putters, the White Ice Series has been created with the feedback of professional golfers. The White Ice name for the series comes from the insert of the same name, which Odyssey promotes as its best-feeling multi-layer insert (19 percent firmer and 92 percent stiffer than previous models). This insert contributes to the consistency and responsiveness of these putters. The rough texture of the face works with this insert to promote forgiveness and control in your putts. Some of the models in the White Ice series (2-Ball, 2-Ball Blade, 2-Ball F7, 2-Ball CS) have adjustable weighting. The headweight can be adjusted to 350g, 360g or 370g on these models, with the help of weight chips. Other models (#1, #2, #5, 330 Mallet, #7, #9, Rossie) have optimized headweight, which is distributed by weight ports in the putter's sole. There are nineteen model variations available.

Features

Nineteen model variations
3 degree loft
Extended mallet head
Double-bend shaft
Dark nickel finish
White Ice insert
Multi-layer insert
Rough face texture
Unique head shapes

Model Options

2-Ball - Full-shaft offset, 33"-35" lengths adjustable headweight, 2-ball alignment, 70 degree lie
2-Ball Blade - Full-shaft offset, 33"-35" lengths, adjustable headweight, 2-ball alignment, 70 degree lie
2-Ball CS - No offset, 33"-35" lengths, adjustable headweight, 2-ball alignment, 71 degree lie
2-Ball F7 - Full-shaft offset, 33"-35" lengths, 355g headweight, 2-ball alignment, 70 degree lie, advanced MOI, left-handed version available
2-Ball V-Line - Full-shaft offset, 33"-35" lengths, 355g headweight, 2-ball alignment, 70 degree lie, new head design
2-Ball Long - 48" and 50" lengths, full-shaft offset, 450g headweight, 78 degree lie, 2-ball alignment split grip
2-Ball Mid - 43" length, 72 degree lie, full-shaft offset, 400g headweight, 2-ball alignment, long grip
Teron - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight, advanced MOI
Teron CS - 33"-35" lengths, 71 degree lie, no offset, 355g headweight
Mini T - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight, advanced MOI
Sabertooth - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight, high MOI, aiming channels
Sabertooth2 - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight, left-handed version available, advanced MOI
#1 - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight for 33" and 34" lengths, 340g headweight for 35" length, left-handed version available, optimized headweight
#2 - 33"-35" lengths, 70 degree lie, half-shaft offset, 355g headweight for 33" and 34" lengths, 340g for 35" length, left-handed version available, optimized headweight
#5 - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight for 33" and 34" lengths, 340g for 35" length, left-handed version available, optimized headweight
330 Mallet - 33"-35" lengths, 70 degree lie, full-shaft offset, 360g headweight for 33" and 34" lengths, 345g for 35" length, optimized headweight
#7 - 33"-35" lengths, 70 degree lie, full-shaft offset, 360g headweight for 33" and 34" lengths, 345g for 35" length, optimized headweight
#9 - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight for 33" and 34" lengths, 340g for 35" length, left-handed version available, optimized headweight
Rossie - 33"-35" lengths, 70 degree lie, full-shaft offset, 355g headweight for 33" and 34" lengths, 340g for 35" length, optimized headweight

King Cobra Optica SL Putters

Mon, 20 Jul 2009 15:43:43 -0400

The King Cobra Optica SL Putters are a line of putters that give superior alignment, feel and a consistent true roll. The head design uses a tri-metal constuction to give efficient weight distribution for maximum forgiveness. The majority of the putter head mass is forced to the rear with a steel weight bar, and the top of the club utilizes ultra lightweight urethane to give a 60% increase in the moment of intertia (MOI). This also ensures a deep center of gravity (CG) which results in a smooth roll with each stroke, and the precision milled face pattern helps minimizes skid. The aluminum in the head gives a very soft feel, and in combination with the urethane top gives improved dampening of unwanted vibrations. The truGlo fiber-optic sight line helps you line up your shot with a new level of precision. Cobra offers 6 men's versions of the Optica SL Putters and 2 ladies versions, as listed below.

Men's Models

King Cobra Optica SL - 01
King Cobra Optica SL - 02
King Cobra Optica SL - 03
King Cobra Optica SL - 04
King Cobra Optica SL - 05
King Cobra Optica SL - 06

Ladies Models

King Cobra Optica SL - 01 Ladies
King Cobra Optica SL - 03 Ladies

Specifications / Features

6061 aluminum forged head
Grip options: Winn/Cobra Optica, Cobra/Winn Custom
Shaft options: Cobra/True Temper Center Shaft, Cobra/True Temper Single Bend
TruGlo fiber optic sight line

TaylorMade Rossa TP by KiaMa Putters

Wed, 15 Jul 2009 17:03:18 -0400

The TaylorMade Rossa TP by KiaMa Putters are a line of putters that are exquisitely crafted for the discriminating player. The club head is milled from end to end from soft 1018 carbon steel and finished in a stylish Midnight Black. Every edge, curve and surface of the club is designed with precision, balance and care for an elegant look and outstanding performance. The cavity features linear Pads and Bumbers for optimal alignment, with no step in the flange. Each blade putter (except the Imola - Aluminum) features custom tungsten weights in the back cavity for a deeper and lower center of gravity (CG) resulting in a crisper feel. There are five club head models available; the Daytona, Imola, Monaco, Monte Carlo and Maranello.

Features

Milled 1018 carbon steel
Midnight Black finish
Linear Pads and Bumpers
Custom tungsten weights in back cavity
Loft: 3.5 degrees
Lie angle: 70 degrees
Club lengths: 34", 35"
Club swing weight: 6-8

Putter Models

Daytona
- Right and Left handed options
- Full Shaft Offset
- Blade design
Imola
- Right handed option only
- 3/4 shaft offset
- Blade design
Monaco
- Right handed option only
- Full shaft offset
- Blade design
Monte Carlo
- Right handed option only
- 1/2 shaft offset
- Mallet design
Maranello
- Right handed option only
- 3/4 shaft offset
- Mallet design

Ping Faith Putters

Fri, 29 Oct 2010 17:54:18 -0400

The Ping Faith Putters represent three different models of putters designed strictly for women. Especially geared to extend a woman’s distance and performance on the green, the Faith uses specialized PING technology in addition to an advanced urethane insert that together offer a more consistent response on every putt for better distance control. Also included is a face appliqué for a soft feel, and weight savings from the insert that were augmented to the perimeter to increase overall MOI. This means an improved MOI and better accuracy. The Faith series is available in a traditional Anser model, a face-balanced Craz-E model, and a forgiving Wack-E model.

Features

Faith Putters Series
3 Models
Designed for Woman
Game-Improvement Putter
PING Technology
Advanced Urethane Insert
Consistent Response
Enhanced Distance Control
Improved MOI
Enhanced Accuracy

Model Variations

Anser | RH/LH | 345 g | Heel-Toe | ±4° | Conventional
Craz-E | RH/LH | 360 g | Face | ±2° | Conventional
Wack-E | RH/LH | 370 g | Face | ±2° | Conventional

Odyssey Backstryke

Tue, 27 Apr 2010 13:39:16 -0400

Odyssey's Backstryke putters are higher-end, competitive models available in three different styles. It should be noted that the weight, loft angles and shaft lengths are identical for each model, and so the actual shape of each head type is mainly to appeal to different visual preferences for aiming. All three have carefully balanced heads that allow for smooth and consistent strokes. They use "forward press stabilization", which basically means that the shaft is positioned to encourage proper hand position, in turn increasing the potential for top spin and consistent control throughout the stroke. The face of the club is offset from the shaft by a large margin, making the face surface fully visible for easier aiming. Each club has a white face insert with a more solid feel than other Odyssey putters, and a rough surface that can help increase top spin.

Features

Offset face promotes visibility
Shaft encourages proper hand position
High topspin potential
Solid and rigid white face insert
Even, balanced head weighting
Deep centre of gravity
Loft: 3 degrees
Lie: 69 degrees
355g headweight
33, 34, 35" shafts

Model Variations

Backstryke Marxman

D-shaped head

Backstryke Blade

Semi-traditional blade-shaped head

Backstryke 2-Ball

2 circular ball-size inserts on top

Ping iWi Series

Mon, 16 Feb 2009 14:04:59 -0500

The Ping iWi putter series is a 2009 addition to Ping's highly praised line of putters. The iWi putter series is a high end offering from ping, geared towards low to mid handicap golfers. It is the first customizable line of putters offered by Ping, allowing golfers to change the overall heel-toe weight ratio by inserting tungsten weights in the sole of the putter until a desired feel is achieved. There are 9 weight combinations available to the user by way of an optional (sold separately) weight kit. The Ping iWi series also features a two-piece face insert system, a 304 stainless steel face insert is encased in an elastomer backing, in order to provide steel-face performace with a softer feel.

Ping iWi Series Models and Specs

There are 6 putter models available in Ping's iWi Series and all putters are available in both left and right handed options. Each iWi putter comes standard with two 12 gram stainless steel sole weights. These 6 models are as follows:

Ping iWi 1/2 Craz-E

Head Weight: 355g
Face Balanced

Ping iWi Anser

Head Weight: 345g
Heel-Toe Balanced

Ping iWi B60

Head Weight: 350g
Heel-Toe Balanced

Ping iWi Craz-E

Head Weight: 370g
Face Balanced

Ping iWi D66

Head Weight: 345g
Heel-Toe Balanced

Ping iWi Zing

Head Weight: 345g
Heel-Shafted

Ping Scottsdale Putters

Fri, 29 Oct 2010 17:54:18 -0400

Ping Scottsdale Putters represents 14 different models of putters that use high-contrast alignment aids and improved sightlines to help users line up their shots more accurately. In particular, they all feature a darker finish geared to help users better identify the maroon and white alignment aids & sightlines. Also included is an insert made from a thermoplastic elastomer (TPE) with a face applicque for a soft but solid feel. This combination of TPE and expanded perimeter weighting results in an improved feel and truer roll. Plus it further aids users to accurately gauging distances.

Features

Scottsdale Putters Series
14 Models
High-Contrast Alignment Aids
Darker Finish
TPE Insert
Soft but Solid Feel
Truer Roll
More Accurate Distance Gauging

Model Variations

Anser® 2 | RH/LH | 340 g | Heel-Toe | ±4° | Conventional
B60™ | RH/LH | 340 g | Heel-Toe | ±4° | Conventional
Craz-E Too™ | RH/LH | 355 g | Face | ±2° | Conventional
Half Pipe™ | RH/LH | 345 g | Face | ±2° | Conventional
Hohum™ | RH/LH | 360 g | Face | ±2° | Conventional
Pickemup™ | RH/LH | 345 g | Face | ±2° | Conventional
Pickemup™ B | RH/LH | 390 g | Face | ±2° | Mid-Length
Pickemup™ L | RH/LH | 460 g | Face | n/a | Long
Tomcat™ | RH/LH | 340 g | Heel-Toe | ±4° | Conventional
Wolverine™ | RH/LH | 355 g | Face | ±2° | Conventional
Wolverine™ C | RH/LH | 370 g | Face | ±2° | Conventional
Wolverine™ H | RH/LH | 365 g | Heel-Toe | ±4° | Conventional
Y Worry™ | RH/LH | 365 g | Face | ±2° | Conventional
ZB® | RH/LH | 340 g | Heel-Toe | ±4° | Conventional

Odyssey Black Series Tour Designs

Fri, 04 Jun 2010 15:07:07 -0400

The Odyssey Black Series Tour Designs series is a line of milled putters. These putters are designed with A.R.T. (Advanced Roll Technology), which means that they are designed with the best roll in mind. To that end, a urethane dampening layer sits between the 1025 carbon steel head and the independently milled tungsten flange, for a lower, deeper center of gravity, which promotes a quicker roll. The precise pattern of the milled face helps make impact performance consistent, to give you more control on your putts. The putters in this line have been designed with the input of professional golfers like Phil Mickelson and Ernie Els, and the deep black PVD (Physical Vapor Deposition) finish is one of the features specifically designed with the pro's specs. There are five model options available for the Black Series Tour Designs putters, the models differing in shaft offset, hosel design and blade design.

Features

Milled tungsten flange
Soft feel
A.R.T. technology
Multi-material constructon
1025 carbon steel head
Low, deep center of gravity
Urethane dampening layer
Deep black PVD finish
Precision weighting based on putter length
33", 34" and 35" lengths for every model
3 degree loft
70 degree lie

Model Options

Black Series Tour Designs #2 - Heel-toe weighted blade, crank-neck hosel, full-shaft offset, 350g headweight for 33" and 34" lengths, 340g headweight for 35" length, left-handed version available
Black Series Tour Designs #4 - Rounded heel-toe flanged blade, crank-neck hosel, full-shaft offset, 350g headweight for 33" and 34" lengths, 340g headweight for 35" length, no left-handed version available
Black Series Tour Designs #6 - Scoop-back blade w/ squared off toe, slant neck hosel, half-shaft offset, 350g headweight for 33" and 34" lengths, 340g headweight for 35" length, no left-handed version available
Black Series Tour Designs #9 - Toe-weighted, heel-shafted, flanged blade, long hosel, half-shaft offset, 350g headweight for 33" and 34" lengths, 340g headweight for 35" length, left-handed version available
Black Series Tour Designs 2-Ball Blade - Hogged-out hosel, 17-4 stainless steel sole plate, tungsten weight plug, full-shaft offset, 360g headweight for 33" and 34" lengths, 350g headweight for 35", no left-handed version available

TaylorMade Monza Spider Vicino

Fri, 04 Jun 2010 14:09:42 -0400

The TaylorMade Monza Spider Vicino is a high end putter designed for stability. This is achieved by using a light polymer core and steel frame to move the weight to to the edges of the putter, allowing for more forgiveness and a deeper center of gravity. A composite insert with AGSI+ Technology promotes more forwardspin, which helps gain distance as well as add some control. Some customization is possible through Movable Weight Technology to allow for a desired feel to the swing.

Features

Tapered from front to back
Ultra-light polymer core
Steel frame
Composite insert with AGSI+ Technology
Movable Weight Technology for customisable feel

TaylorMade Rossa Itsy Bitsy Monza Spider

Wed, 15 Jul 2009 17:39:48 -0400

The TaylorMade Rossa Itsy Bitsy Monza Spider is a putter designed to give golfers forgiveness and accuracy in a midsize head. This model is 20% smaller than the original Monza Spider and has a steel wire-frame constuction with light aluminum core to push the weight to the perimeter, increasing the moment of intertia (MOI) for more consistent distance on off-center hits. The Movable Weight Technology (MWT) has two movable weights to shift the weight far from the face and push the center of gravity (CG) rearward for increased MOI and stability. The AGSI+ (Anti-skid Grove System Insert) TitalliumTM face insert has 14 tightly positioned grooves to promote more efficient forward spin and reduce skid and bounce for superior distance-control and accuracy. These grooves are filled with a soft polymer to absorb unwanted impact vibration to give a satisfying feel at impact.

Features

20% lighter than original model
Steel wire-frame w/ light aluminum core
Movable Weight Technology
AGSI+ (Anti-skid Grove System Insert)
TitalliumTM face insert
Loft: 2.5 degrees
Lie angle: 70 degrees
Offset(MM): Full, 3/4
Club lengths: 33", 34", 35"

MacGregor Hoylake ROTA Series Putter

Tue, 27 Apr 2010 21:37:53 -0400

The Hoylake Putter is a golf club from MacGregor’s 2010 ROTA Series lineup. This putter is named after the practice of rotating courses that have hosted the Open Championship. The Hoylake is traditional in appearance, but features modern putter technology. Along with the classic heel-shafted design, golfers will find an ARC face, which is intended to stabilize the ball when rolling off the putter. The club’s face is fine-milled in order to provide a level, consistent surface. This putter comes in a straight shaft type with a loft set at 3°. The MacGregor Hoylake ROTA Series Putter is available in a champagne finish, with a right-handed orientation only.

Features

Classic Head Design
ARC Face Technology
MacGregor Winn Grip
Hand: Right
Putter Type: Traditional
Shaft Type: Straight
Length: 34” or 35”
Loft: 3°

Cleveland Classic 2 Putter

Thu, 23 Jul 2009 16:59:58 -0400

The Cleveland Classic 2 Putter is a golf putter inspired by classic design, and created for performance. It is made from 17-4 stainless steel and has a precision milled face that provides a soft yet solid feel during the stroke. The feel and control is further improved by the classic red grip. Added heel-top weighting increases the moment of inertia (MOI) for added forgiveness and to prevent unwanted twisting on off-center shots. The head has a hand-polished satin finish to minimize glare and provide a long lasting durable finish. The Cleveland Classic 2 Putter weighs 340g and is available in 33", 34" and 35" in RH only.

Specifications

17-4 stainless steel
Precision milled face
Classic red grip
Heel-top weighting
Hand-polished satin finish
Weight: 340g
Lengths: 33", 34", 35"
Design: Blade
Lie: 70 deg
Loft: 3 deg
RH only

Nike Method Series

Fri, 04 Jun 2010 14:29:05 -0400

The Nike Method Series are professional quality putters. They use Polymetal grooves on the face itself that put a positive spin on the ball quicker, reducing bounce and increasing accuracy. The face itself is made of a number of materials to dampen impact in a similar fashion to a polymer, but with the look of steel. Tungsten heel-toe weighting removes 30 grams from the face and puts it at the perimeter of the head, increasing the moment of inertia and granting more stability.

Features

Polymetal grooves on face
Multi-material face that dampens impact
Tungsten heel-toe weighting

Model Options

Classic blade
Heel shafted blade
Heel shafted mid-mallet
Face balanced blade
Face balanced mid mallet

MacGregor Lytham ROTA Series Putter

Tue, 27 Apr 2010 21:38:06 -0400

The Lytham Putter is a golf club from MacGregor’s 2010 ROTA Series lineup. This putter is named after the practice of rotating courses that have hosted the Open Championship. The Lytham is traditional in appearance, but features modern putter technology. Along with the mallet-headed design, golfers will find an ARC face, which is intended to stabilize the ball when rolling off the putter. The club’s face is fine-milled in order to provide a level, consistent surface. This putter comes in a double-bend shaft type with a loft set at 3°. The MacGregor Lytham ROTA Series Putter is available in a champagne finish, with a right-handed orientation only.

Features

Mallet Head Design
ARC Face Technology
Low, Deep Center of Gravity
MacGregor Winn Grip
Hand: Right
Shaft Type: Double Bend
Length: 34” or 35”
Loft: 3°

Cleveland Classic 1 Putter

Thu, 23 Jul 2009 16:57:47 -0400

The Cleveland Classic 1 Putter is a golf putter inspired by classic design, and created for performance. It is made from 17-4 stainless steel and has a precision milled face that provides a soft yet solid feel during the stroke. The feel and control is further improved by the classic red grip. Added heel-top weighting increases the moment of inertia (MOI) for added forgiveness and to prevent unwanted twisting on off-center shots. The head has a hand-polished satin finish to minimize glare and provide a long lasting durable finish. The Cleveland Classic 1 Putter weighs 340g and is available in 33", 34" and 35" in RH and LH.

Specifications

17-4 stainless steel
Precision milled face
Classic red grip
Heel-top weighting
Hand-polished satin finish
Weight: 340g
Lengths: 33", 34", 35"
Design: Blade
Lie: 70 deg
Loft: 3 deg
RH and LH

Titleist Scotty Cameron Circa 62 Charcoal Mist

Tue, 17 Feb 2009 18:45:14 -0500

The Titleist Scotty Cameron Circa 62 Charcoal Mist is one of four putter available in Titleist's Scotty Cameron line. This putter is designed to embody the best of a classic putter generation, right down to the classic lines with a Charcoal Mist finish to give it a vintage appearance. The head is made from milled soft carbon steel giving a soft, respsonsive feel. A draft sole ensures a square-set postion and ensures the head never sits closed. A high toe profile eliminates the tendency of players to raise the toe causing them to aim consistently to the left. The Circa 62 comes in 5 models, all of which have a 35" length, 330g weight, 4º loft and 71º lie with a red Baby T grip and red headcover. It should be noted that the No. 2 model is the only available in LH.

Features / Specifications

Vintage look and feel
Charcoal Mist finish
Milled soft carbon steel
Draft sole
High toe profile
Models: No. 1, No. 2 (LH & RH), No. 3, No. 6, No. 7
35" length
330g weight
4º loft
71º lie with
Red Baby T grip
Red headcover

MacGregor Prestwick ROTA Series Putter

Tue, 27 Apr 2010 21:38:14 -0400

The Prestwick Putter is a golf club from MacGregor’s 2010 ROTA Series lineup. This putter is named after the practice of rotating courses that have hosted the Open Championship. The Prestwick is traditional in appearance, but features modern putter technology. Along with the peripheral-weighted design, golfers will find an ARC face, which is intended to stabilize the ball when rolling off the putter. The club’s face is fine-milled in order to provide a level, consistent surface. This putter comes in a straight shaft type with a loft set at 3°. The MacGregor Prestwick ROTA Series Putter is available in a champagne finish, with a right and left-handed orientation.

Features

Peripheral-weighted Design
ARC Face Technology
MacGregor Winn Grip
Hand: Right/Left
Shaft Type: Straight
Length: 34” or 35”
Loft: 3°

Ping iN Series

Fri, 04 Jun 2010 14:00:11 -0400

The Ping iN Series are high-end putters that balance feel and forgiveness. The center of the body has been hollowed out, and weight moved around to the perimeter. This increases the moment of inertia and gives better control. Nano-nickel technology is used to plate the putter for a solid sound and feel.

Features

Lightweight polymer core
Nano-Nickel plating technology
Increased MOI via weight distribution
Winn textured grip (Black/Red)
Headcover included

Specifications

½ Wack-E - RH/LH, 345 g, Face balance, ±2° adjustment, Conventional
½ Wack-E B - RH/LH, 365 g, Heel-Toe balance, ±4° adjustment, Mid-Length
½ Wack-E L - RH/LH, 480 g, Face balance, Long
Anser V2 - RH/LH, 350 g, Heel-Toe balance, ±4° adjustment, Conventional
B60 V2 - RH/LH, 350 g, Heel-Toe balance, ±4° adjustment, Conventional
Craz-E - RH/LH, 360 g, Face balance, ±2° adjustment, Conventional
D67 - RH/LH, 350 g, Heel-Toe balance, ±4° adjustment, Conventional
Li'l Wack-E - RH/LH, 345 g, Heel-Toe balance, ±4° adjustment, Conventional
Wack-E - RH/LH, 370 g, Face balance, ±2° adjustment, Conventional
ZB2 - RH/LH, 340 g, Heel-Shafted balance, ±4° adjustment, Conventional

Titleist Scotty Cameron Newport Detour

Tue, 17 Feb 2009 18:45:24 -0500

The Titleist Scotty Cameron Newport Detour is one of four putter available in Titleist's Scotty Cameron line. The arched design encourages players to swing the putter on the proper path for better ball performance. The putter head is made of a 303 stainless steel frame, 303 stainless steel backweight and aircraft aluminum face and body. The backweight pushes the center of gravity (CG) to the back for increased stability, and a dampening ring around the weight gives a superior sound and feel. The club features orange highlights, inclding an Accident Orange Studio Design grip and Accident Orange headcover. There are two models available; the Newport 2 Detour and Newport 2.5 Detour. Both have a 4° loft and 71° lie and have a 34"(340g) and 35"(330g) model. The Newport 2 also has a 33"(350g) model, as well as a LH 35"(330g) model. The Newport 2 has a full shaft offset and plumbing neck while the 2.5 has a 1/2 shaft offset and flare neck.

Specifications / Features

T-6 6061 Aircraft Aluminum Face and Body
303 Stainless Steel Frame
303 Stainless Steel Backweight
Backweight with dampening ring
Orange accents
Accient Orange Studio Design grip
Accident Orange headcover
Models: Newport 2 Detour, Newport 2.5 Detour
4° loft
71° lie
Lengths: 33", 34", 35"
Weights: 350g, 340g, 330g
Offsets: Full shaft, 1/2 shaft
Neck: Plumbing, Flare

Odyssey White Hot Tour Series

Mon, 16 Feb 2009 07:33:36 -0500

The Odyssey White Hot Tour Series includes seven different putters: #1, #2, #2 CS, #5, #7H, #9, and the Rossie putter. The #1 White Hot Tour putter is a rounded heel-toe weighted blade. The #2 putter is a modified scoop-back blade with a half-shaft offset while the #2 CS has a modified scoop-back blade with a center shaft and no offset. The #5 putter is a face-balanced mallet with a double-bend shaft. The #7H is an oversized mallet, modified with weighted alignment wings and a double-bend shaft. The #9 putter in the Odyssey White Hot Tour Series is a toe-weighted, heel-shafted, flanged blade with a long hosel and a half-shaft offset. Last but not least, the Rossie putter is a face-balanced mallet with double-bend shaft. They all have lengths of 33", 34", or 35", a loft of 3 degrees, a lie of 70 degrees and if not otherwised specified, have a full-shaft offset.

Features

7 putters
#1: rounded heel-toe weighted blade
#2: modified scoop-back blade
#2 CS: modified scoop-back blade with no offset
#5: face-balanced mallet
#7: oversized mallet
#9: toe-weighted blade
Rossie: face-balanced mallet

Odyssey Black Series

Mon, 16 Feb 2009 06:56:41 -0500

The Odyssey Black Series Putter uses a deep center of gravity to deliver a better roll across the green. The flange is made out of a high-density tungsten and is used to move the weight in the head to create that heavy center and up the moment of inertia. With the center of gravity heavier, a higher launch angle is provided, and less loft is required to move the ball in the right direction. The manufacturer of the Black Series Putter claims to fine tune each and every putter for the best performance. The body is made out of a 1025 carbon steel and the Odyssey Black Series Putter has weight removed from the hosel and redistributed to the flange.

Features

1025 carbon steel body
Tungsten Flange
Precision Milled head
Gutted hosel
Urethane Dampening layer
Fine-tuned loft system
Nickel-plated finish
Traditional styling

Ping i-Series

Mon, 16 Feb 2009 13:41:31 -0500

The Ping i-Series putters are a 2008 addition to Ping's highly respected line of putters. The putters in this series are crafted out of 17-4 stainless steel and in general uses a two-piece insert, a urethane insert and a face applique, to give the golfer a soft feel but not lose the firm response. The 1/2 Craz-E and 1/2 Moon models are not traditional designs, they are focused on making alignment easier for the golfer and making the MOI bigger and better. The Anser and Zing models are more traditionally built for golfers who want to stick with Ping's tried and true putter models but still get the most out of the new i-Series technology.

i-Series Models and Specs

There are 10 putter models available in Ping's i-Series and all putters come in right and left handed options. These 10 models are as follows:

Ping i-Series 1/2 Craz-E

Putter Weight: 365g
Face Balanced

Ping i-Series 1/2 Craz-E B

Putter Weight: 385g
Face Balanced

Ping i-Series 1/2 Craz-E L

Putter Weight: 480g
Face Balanced

Ping i-Series 1/2 Moon

Putter Weight: 340g
Heel-Toe Balanced

Ping i-Series Anser

Putter Weight: 340g
Heel-Toe Balanced

Ping i-Series Anser 4

Putter Weight: 340g
Heel-Toe Balanced

Ping i-Series B60

Putter Weight: 350g
Heel-Toe Balanced

Ping i-Series Craz-E

Putter Weight: 365g
Face Balanced

Ping i-Series Piper H

Putter Weight: 365g
Face Balanced

Ping i-Series Zing

Putter Weight: 340g
Heel-Shafted

Cleveland Classic 3 Putter

Thu, 23 Jul 2009 17:00:03 -0400

The Cleveland Classic 3 Putter is a golf putter inspired by classic design, and created for performance. It is made from 17-4 stainless steel and has a precision milled face that provides a soft yet solid feel during the stroke. The feel and control is further improved by the classic red grip. Added heel-top weighting increases the moment of inertia (MOI) for added forgiveness and to prevent unwanted twisting on off-center shots. The head has a hand-polished satin finish to minimize glare and provide a long lasting durable finish. The Cleveland Classic 3 Putter weighs 340g and is available in 33", 34" and 35" in RH only.

Specifications

17-4 stainless steel
Precision milled face
Classic red grip
Heel-top weighting
Hand-polished satin finish
Weight: 340g
Lengths: 33", 34", 35"
Design: Blade
Lie: 70 deg
Loft: 3 deg
RH only

TaylorMade Rossa Monza Spider Balero

Wed, 15 Jul 2009 17:42:59 -0400

The TaylorMade Rossa Monza Spider Balero is a putter designed to give golfers accuracy and forgiveness. Its Uni-Body steel construction gives the club a high moment of inertia (MOI) which helps give it stability and forgiveness. The AGSI+ (Anti-skid Grove System Insert) TitalliumTM face insert has 14 tightly positioned grooves to promote more efficient forward spin and reduce skid and bounce for superior distance-control and accuracy. These grooves are filled with a soft polymer to absorb unwanted impact vibration to give a satisfying feel at impact. The Ball-in-Cup head shape provides a powerfull visual aid making it extremely easy to aim the face and start the ball on line.

Features

Uni-Body steel construction
AGSI+
TitalliumTM face insert
Ball-in-Cup head shape
Loft: 2.5 degrees
Lie angle: 70 degrees
Offset (MM): 1/2
Club length: 34", 35"

Cleveland VP509

Thu, 23 Jul 2009 17:49:49 -0400

The Cleveland VP509 is one of two putters available in Cleveland's line of Visual Performance putters. These putters improve a golfers putting game by naturally positioning the golfers eyes directly above the ball for better alignment and better results. The feature a dual axis alignment which tells the golfer if they are centered above the ball and also lets golfer know if their hands move out of position. This gives golfers a more consistent putting stroke resulting in a more true roll and better distance control. For added customization, the VP509 is available in standard, flat and upright lie angle configurations with an alignment insert. It also features a double-bend shaft, 3/4 shaft offset, a face-balanced design and has a soft elastomer face insert.

Features

Double-bend shaft
3/4 shaft offset
Lie angle-alignment insert
Face-balanced design
Soft elastomer face insert
Dual-axis alignment
Design: Mallet
Length: 33", 34", 35"
Lie: Standard, Flat, Upright
Loft: 3 deg
Weight: 355g
RH and LH models

Ping Redwood Series Putters

Fri, 24 Jul 2009 13:52:53 -0400

The Ping Redwood Series Putters is a line of putters that pay tribute to the home of the original Ping putter; Redwood City, California. Based on putters orignally designed in Karsten Solheim's garage, these putters have the quality and innovation expected from Ping and are 100% milled to create classic shapes and clean flowing lines that inspire confidence on the green. They are made from 303 stainless steel and are available in two finish options; Black Nickel or Black Satin. The series offers a number of classic and new model shapes and are targeted for players seeking the very best.

Specifications

303 stainless steel
100% milled
Finish: Black Nickel or Black Satin
Classic and new model shapes
RH and LH (all models)
Adj. +/- 2 deg (all models)
Type: Conventional (all models)

Model Options

(Model), (Head Weight), (Balance)
Anser, 340g, Heel-Toe Balance
D66, 343g, Heel-Shafted
Piper, 355g, Face Balance
Zing, 340g, Heel-Shafted
ZB, 340g, Heel-Toe Balance

Cleveland VP109

Thu, 23 Jul 2009 17:47:05 -0400

The Cleveland VP109 is one of two putters available in Cleveland's line of Visual Performance putters. These putters improve a golfers putting game by naturally positioning the golfers eyes directly above the ball for better alignment and better results. The feature a dual axis alignment which tells the golfer if they are centered above the ball and also lets golfer know if their hands move out of position. This gives golfers a more consistent putting stroke resulting in a more true roll and better distance control. For added customization, the VP109 is available in standard, flat and upright lie angle configurations with an alignment insert. It also features a slant plumber's neck hosel, full shaft offset, toe down design and soft elastomer face insert.

Features

Slant plumber's neck hosel
Full shaft offset
Toe down design
Soft elastomer face insert
Lie angle alignment insert
Dual-axis alignment
Design: Blade
Lengths: 33", 34", 35"
Lie: Standard, Flat, Upright
Loft: 3 deg
Weight: 340g
RH only

Titleist Scotty Cameron Red X Charcoal Mist

Tue, 17 Feb 2009 18:45:31 -0500

The Titleist Scotty Cameron Red X Charcoal Mist is one of four putter available in Titleist's Scotty Cameron line. This is a traditional mallet style putter with a a 303 stainless steel body finished with a glare-resistand Charcoal Mist finish for a unique look and feel. The aluminum sole plate with red graphics covers the precise internal weighting. The high toe profile eliminates the tendency of players to raise the toe causing them to aim consistently to the left. The Red X3 has a single bend shaft with 1/4" shaft offset, while the Red X5 has a plumbing neck with full shaft of offset, and both models have a single sight line to help guide your shot. Both models have a 4° lie, 71° loft and are available in 330g(35"), 340g(34") and 350g(33") weights/lengths. On top of the red graphics on the club head, there is a red Cameron Baby T grip and a red and black head cover. It should be noted that only the X3 is available in a LH model.

Specifications / Features

Traditional mallet head design
303 stainless steel body
Glare-resistand Charcoal Mist finish
Aluminum sole
High toe profile
Models: Red X3 (LH and RH), Red X5
4° lie
71° loft
Weights: 330g, 340g, 350g
Lengths: 35", 34", 33"
Red Cameron Baby T grip
Red and Black headcover

Odyssey Black Series i

Mon, 16 Feb 2009 07:33:17 -0500

The Odyssey Black Series i Putter is similar to the original line, especially in its construction. The body is made out of a 1025 carbon steel and weight is moved from the hosel and redistributed to the perimeter of the head, giving it a larger moment of inertia. The flange is made out of a high-density tungsten to increase the weight. With the center of gravity heavier, a higher launch angle is provided, and less loft is required to move the ball in the right direction. The Odyssey Black Series i claims to fine tune each and every putter for the best performance and finishes them off with a nickel plating.

Features

1025 carbon steel body
Tungsten Flange
Precision Milled head
Weight moved from Hosel to Head
Urethane Dampening layer
Fine-tuned loft system
Nickel-plated finish
Traditional styling

Titleist Studio Select Kombi

Fri, 24 Jul 2009 13:26:18 -0400

The Titleist Studio Select Kombi is a set of mallet style putters that are a part of Scotty Camerons line of putters. There are three models available in this line; The Kombi (RH & LH), Kombi Mid (RH) and Kombi Long (RH). They features Studio Select heel and toe weighting technology that ensures proper headweight-to-length properties giving multiple length options per model. There is a third weighing point near the back of the club head, that is factory adjustable in the Kombi model, which pushes the center of gravity (CG) deep in the club to stabilize the putter through the stroke and a give great roll, feel and sound. The player-preferred shape gives the club a pleasing look in the putting position and the clean, misted topline with high-contrast T-shaped sightline reduces visual thickness and makes face alignment easy. The double bend shaft with full shaft offset gives an unobstructed look at address. The Kombi model is also available with a heavier head to give a heavier feel prefered by some players.

Features

Studio Select heel and toe weighting technology
Third weighing point
Player-preferred shape
Misted topline
High-contrast T-shaped sightline
Models: Kombi, Kombi Mid, Kombi Long

Kombi Model Specifications

Loft: 4 deg.
Lie: 71 deg.
RH Length, STD: 33", 34", 35"
RH Length, Heavier: 34", 35"
LH Length, STD: 33", 34", 35"
LH Length, Heavier: 34", 35"
Headweight, STD: 360g(33"), 350g(34"), 340g(35")
Headweight, Heavier: 360g(34"), 350g(35")
Offset: Full shaft
Neck: Double Bend
Grip: Red Cameron cord

Kombi Mid Model Specifications

Loft: 4 deg.
Lie: 71 deg.
RH Length: 42", 43", 44"
Headweight: 400g
Offset: Full shaft
Neck: Double Bend
Grip: 2pc Split Red Cameron

Kombi Long Model Specifications

Loft: 4 deg.
Lie: 79 deg.
RH Length: 48", 50"
Headweight: 500g
Offset: Full shaft
Neck: Double Bend
Grip: 2pc Split Red Cameron

Odyssey White Hot XG Series

Mon, 16 Feb 2009 07:33:44 -0500

The Odyssey White Hot XG Series is a relatively inexpensive line of putters. These putters are so named because they feature the White Hot XG insert, which Odyssey promotes as the softest and most responsive in their lineup. The insert lends the White Hot XG Series putters consistency of performance. This multi-layer insert also helps with the distance control of these putters. The Elastomer core material is soft and provides a quick roll. The outer striking surface of the White Hot XG Series putters is thin. The combination of the insert, core and thin striking surface make for a forgiving, responsive putter. There are twenty-one model variations available.

2 Features

Twenty-one models
White Hot XG insert
Multi-layered insert
Elastomer core
Thin striking surface
High MOI
High forgiveness
Truer roll (than previous models)
Unique head shapes
3 degree loft
70 degree lie
335g headweight

Model Options

2-ball: full-shaft offset
2-ball Blade: blade like design, full-shaft offset
2-ball CS: extended mallet, center shaft, no offset
2-ball Lined: extended mallet, full-shaft offset
2-ball F7: extended mallet, weighted alignment wings, double-bend shaft, full-shaft offset
2-ball Long: extended mallet, long shaft, split grip, full-shaft offset
2-ball Mid: extended mallet, mid-length shaft, extended one-piece grip, full-shaft offset
Marxman Mallet: face-balanced alignment, perimeter weighting, full-shaft offset
Marxman Mini: modified face-balanced alignment, perimeter weighting, full-shaft offset
Sabertooth: bad for long shots, great for close up, radical alignment, high-density fangs, full-shaft offset
Teron: high-density perimeter wings, triangulated HD alignment, double-bend shaft, full-shaft offset
#7 Long: larger, modified mallet, weighted alignment wings, double-bend shaft, full-shaft offset
#7 Mid: oversized modified mallet, weighted alignment wings, double-bend shaft, one-piece grip, full-shaft offset
#1: heel-toe weighted blade, crank-neck hosel, full-shaft offset
#7: modified mallet, weighted alignment wings, double-bend shaft, full-shaft offset
#7 CS: modified mallet, weighted alignment wings, center shaft, no offset
#9: toe-weighted, heel-shaft, flanged blade, long hosel, half-shaft offset
Rossie: face-balanced mallet, double-bend shaft, full-shaft offset
Rossie Blade: modified face-balanced, double-bend shaft, full-shaft offset
330 Mallet: face-balanced mallet, hi-def alignment stripes, crank-neck hosel, full-shaft offset
Hawk: modified half-hex, alignment stripe, weighted wings, double-bend shaft and full-shaft offset

Ping Karsten Series

Mon, 16 Feb 2009 14:05:04 -0500

The Ping Karsten Series of putters is a 2008 addition to Ping's highly touted line of putters. The Karsten series features an elastomer insert in the cavity of the putter which provides enhanced feel while maintaining the response of a steel-faced putter. Sight lines are present on all putter models in the Karsten series in order to assist golfers with their alignment. Redistributing the weight around the preimeter of the putter gives a greater moment of inertia as well as making the putters a little more forgiving.

Ping Karsten Series Models and Specs

There are 7 distinct models available in Ping's Karsten line of putters. All models come in both right and left handed options. These 7 models are as follows:

Ping Karsten Anser

Head Weight: 340g
Heel-Toe Balanced

Ping Karsten Anser 2

Head Weight: 340g
Heel-Toe Balanced

Ping Karsten B60

Head Weight: 340g
Heel-Toe Balanced

Ping Karsten C67

Head Weight: 345g
Face Balanced

Ping Karsten Craz-E

Head Weight: 370g
Face Balanced

Ping Karsten Piper

Head Weight: 365g
Face Balanced

Ping Karsten Zing

Head Weight: 340g
Heel-Shafted

Ping JAS Craz-E One

Thu, 16 Jul 2009 09:07:39 -0400

Ping's JAS Craz-e One is a high-end putter. Its head has an unusual square design which is supposed to make it very well balanced. The head is made of aluminum, but there are four tungsten weights (one in each corner) that weigh a total of 96 grams, designed to position the center of gravity in the center of the ball. The distribution is also supposed to make the putter more forgiving. The head is black anodized aluminum, which is supposed to add a stylish touch to the club, as well as giving it a weighted and solid feel. It is available in both left and right handedness and the head weighs a total of 355 grams. If necessary, the head angle can be custom-adjusted to +/- 2 degrees.

Features

Anodized aluminum head
355 gram head weight
Tungsten weights in each corner (total 96g)
Unique square design
Stylish design
Centre of gravity designed to maximize roll
Forgiving, large sweet spot

Odyssey Crimson Series

Mon, 16 Feb 2009 07:33:23 -0500

Each Odyssey Crimson Series putter is constructed with Grade 431 stainless to give it unique strength and control. The series includes three different putters with different features, the 550, the 660 and the 770. All of the putters include the Crimson Stronomic insert that gives a solid feedback to the golfer and a full-shaft offset. The Crimson Series 550 has a face-balanced, rounded mallet and an extended slant-neck hosel. The 660 and the 770 both use a crank-neck hosel, with the 660 equiped with a rounded, heel-toe weighted blade and the 770 equiped with a modified heel-toe weighted blade with alignment channels.

Features

Grade 431 stainless
3 different putters
Crimson Stronomic insert
Full-shaft offset
550: face-balanced, rounded mallet and slant-neck hosel
660 & 770: crank-neck hosel
660: Rounded, heel-toe weighted blade
770: Modified heel-toe weighted blade with alignment channels

Nike IC Series

Tue, 17 Feb 2009 13:03:25 -0500

The Nike IC Series putters are a mid-grade set of putters designed with a very simplistic look; the ultimate purpose is to minimize the amount of extra distraction for golfers while making a putt. Optical engineering is used to tune the color shape, and contrast of each club in the set to blend the head of the shaft into a smaller visual field. The IC Series putters include a plain ball alignment aid which allows users to correctly strike the ball without having to fully visualize everything beforehand.

The Nike IC Series clubs include several key features which make up their unique purpose and design. A total club color helps blend the overall appearance of the club and the head into a user's vision without creating loud noise or extensively bright colors which distract the eyes. An optical alignment aid in the center of the club head ensures users hit the ball correctly every time and allows users to focus their eyes completely on the putter during swing. A "milled face" allows the enhancement of accuracy, predicability, and distance control through the putter head. Advanced Integration (AI) grip technology means the grip is made out of special materials that ensure an adhesive like bond to the users hand.

Nike IC Series Putters

IC 20-10
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Blade
- MSRP: $159
IC 20-10A
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Blade
- MSRP: $159
IC 20-15
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Mid-Mallet
- MSRP: $159
IC 20-15A
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Small Mallet
- MSRP: $159
IC 20-20
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Large Mallet
- MSRP: $159
IC 20-20A
- Length: 33"/ 34"/ 35"/ 43"
- Hand: Right or Left
- Design: Large Mallet
- MSRP: $159
IC 20-10B
- Length: 33"/ 34"/ 35"
- Hand: Right or Left
- Design: Mid-Mallet
- MSRP: $159

TaylorMade Rossa Monza Spider

Wed, 15 Jul 2009 17:42:52 -0400

The TaylorMade Rossa Monza Spider is a putter designed to give gofers forgiveness and accuracy. The steel wire-frame constuction with light aluminum core to push the weight to the perimeter, increasing the moment of intertia (MOI) for more consistent distance on off-center hits. The Movable Weight Technology (MWT) has two movable weights to shift the weight far from the face and push the center of gravity (CG) rearward for increased MOI and stability. The AGSI+ (Anti-skid Grove System Insert) TitalliumTM face insert has 14 tightly positioned grooves to promote more efficient forward spin and reduce skid and bounce for superior distance-control and accuracy. These grooves are filled with a soft polymer to absorb unwanted impact vibration to give a satisfying feel at impact.

Features

Steel wire-frame w/ light aluminum core
Movable Weight Technology
AGSI+ (Anti-skid Grove System Insert)
TitalliumTM face insert

Nike OZ Series

Tue, 17 Feb 2009 13:29:11 -0500

The Nike OZ Series is a high-end set of putters designed as nike claims to allow users to "putt to perfection". The OZ Series putters include larger grips which provide greater stability through each stroke, and high MOI mallets which help enhance precision and stability. The putter head or mallet is made of a unique polymer material specially crafted and designed to maximize performance and allow users to experience the true feel of a swing.

The Nike OZ Series mallets are designed to compliment the appearance of golf greens without creating too much visual distraction and noise. Each putter comes with a unique mallet composed of a black body and a green fill which is rightfully outlined in white. The grip is uniquely over-sized to allow users a wider amount of grip space and helps increase tackiness.

Nike OZ Series Putter Models

OZ 1
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Blade
OZ 2
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Blade
OZ 3
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Mid-Mallet/ Blade
OZ 4
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Center Shafted Mallet
OZ 5
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: U Shaped Mallet
OZ 6
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Three Pointed Mallet

Odyssey Divine Line Series

Fri, 04 Jun 2010 15:07:51 -0400

The Odyssey Divine Line Series is a mid-priced line of putters designed specifically for women. The increased headweight and shorter shaft lengths of these putters (compared to typical men's putters) help to give the woman golfer optimum control over putts. With the Divine Line Series, Odyssey emphasizes the distinctive head shapes and silver/blue graphic syling, labeling them as "soft". Odyssey promotes the White Hot XG insert present on all the putters in this series as their most responsive insert, promoting distance control. This insert is constructed of soft elastomer, placed beneath the striking surface, and makes for a high Moment of Inertia (MOI). The urethane-infused striking surface is firm and lends the putter a precise response. There are three model options available in the Divine Line Series of putters, each differing only in head shape and headweight.

Features

White Hot XG insert
Two-year warranty
Blue/silver accented color scheme
Soft head shape/styling
Urethane-infused outer
32", 33", 34" lengths for all models
3 degree loft
70 degree lie
Full-shaft offset

Model Options

Divine Line 2-Ball - 360g headweight
Divine Line Rossie - 360g headweight
Divine Line Blade - 350g headweight

Wilson Staff 88 Series Putters

Mon, 20 Jul 2009 16:08:38 -0400

The Wilson Staff 88 Series Putters are a line of putters that offer both classic and innovative head designs. They also feature a choice of inserts (firm or soft) to give pinpoint accuracy and a feel that matches your playing style. These inserts are made fomr anodized aluminum which optimizes feel and response. They have a New proprietary Wilson Staff Winn AVS wrap grip for comfort and performance. They come in a standard 34" length with 72 degrees lie and a flare offset.

Models

Wilson Staff 8875
- Right and Left handed options
- Oversized Back Weight Mallet Design
Wilson Staff 8871
- Right and Left handed options
- Oversized Compact Mallet Design
Wilson Staff 8872
- Right and Left handed options
- Midsized Mallet Design
Wilson Staff 8861
- Right and Left handed options
- Heel/Toe Blade Design
Wilson Staff 8862
- Right handed option only
- Heel/Toe Blade Design

Features

Anodized aluminum face insert (firm or soft)
Perfomance grip: Wilson Staff Winn AVS
Length: 34"
Lie: 72 deg.
Offset: Flare

Odyssey Divine Line

Mon, 16 Feb 2009 07:33:30 -0500

The Odyssey Divine Line includes four different putters: Marxman Putter, 2-Ball Putter, Rossie Putter, and the Blade Putter. The Marxman putter has a unique horse shoe design that carries the weight low and reduces backspin. The 2-Ball putter follows the same horse shoe shape with some asthetic differences. The Rossie putter is one of the more traditional looking members of the line and has a face-balanced mallet and double-bend shaft. The Blade putter is a rounded, heal-toe weighted blade witha double bend shaft. All of the putters in the line come in 32", 33", and 34" lengths, have a 3 degree loft, a 70 degree lie and a full-shaft offset.

Features

32", 33" and 34"
3 degree loft
70 degree lie
Full-shaft offset
Marxman: horse shoe design
2-Ball: similiar to Marxman with two circles on the top
Rossie: traditional design
Blade: weighted blade

Black Velvet Putter

Tue, 22 May 2007 09:44:45 -0400

This Black Velvet putter has a unique black nickel finish with a soft feel milled polymer insert.

Nike Unitized Series

Tue, 17 Feb 2009 23:03:31 -0500

The Nike Unitized Series is a high-end set of golf putters designed to provide an "unparalleled feel" and eliminate the weight of the golf club during a golfer's stroke. A lightweight CNC milled 303 stainless steel clubhead sits atop a unique shaft designed to provide a near absence or invisibility of the putter mallet so that users have a clean look at the ball. Each Nike Unitized putter is designed to funnel vibrations of each ball strike through the club to the user's hands. Nike believes that "better feedback translates into better distance control". This theory is exactly why every piece of the Unitized Series Putters are designed to compliment that "feedback".

Each putter in the Nike Unitized Series is constructed as one single seamless piece; the putter mallet is laser welded directly to the shaft which eliminates connecting joints that interrupt the "feedback". Advanced Integration (AI) grip technology utilizes unique materials that provide a tackiness which is designed to temporarily glue the club to the users hand.

Nike Unitized Series Putter Models

Leo
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Blade
Mako
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Mid-Mallet
Arrow
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Large Mallet
Tiempo
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Blade
Retro
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Blade
Neo
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Mid-Mallet
Techno
- Length: 33"/34"/35"
- Hand: Right or Left
- Design: Center Shafted Mallet